Split Solar Street Light Systems for Road & Highway Projects

Sunlurio is the manufacturer. A split solar street light lets you position the lamp, solar panel and battery separately. We help choose the layout around your road, sunlight and maintenance access.

Start with a site photo or road dimensions. We can work through the technical details with you.

Not Sure Where to Start?

Tell us the country and what the road needs. If you already have poles, send a photo so we can help you reuse suitable equipment.

Have a tender or BOQ? Send the relevant pages and deadline. We help organise the next steps.

How We Recommend Your Split System

We start with the people and area you need to light. The road width, pole positions and owner’s lighting requirements guide the lamp and optics. Local sunlight and the nightly schedule guide the battery and solar panel. We bring those two parts together, so the proposed system is useful on the road and has an energy plan for the night.

Compare split-system quotes using the same nightly schedule

In one solar lighting enquiry, the requested lamp wattage appeared alongside a battery rating in amp-hours. Those figures alone left the overnight operating schedule unclear. If you already have a specification, send the actual LED input at full output, the hours at each dimming level and the required nights of backup. Add the site location so the panel and battery can be sized against the local solar resource.

Ask both suppliers for the same three items: the complete nightly lighting schedule, the battery’s nominal voltage and usable energy assumptions, and a drawing showing where the panel, battery and controller will sit. Check who supplies the brackets and cabling. If the panel or battery box is mounted on the pole, send its size, weight and mounting position for the structural review.

Send your road width, pole spacing and operating schedule using the split-system project enquiry. If the pole is also part of your order, review the lighting pole options and let us know which foundations or poles you plan to reuse.

Four Things We Work Through With You

Send the country, road width, pole height and spacing if you know them. A site photo or rough sketch is enough to begin. If the owner has a local standard or lighting specification, we use it to guide the lamp, optics and proposed layout. We can help you identify any measurements to collect next.

We consider panel direction, shading and the route from the panel to the controller and lamp. For the battery enclosure, we look at service access, temperature, tampering and cable protection. An underground location also needs careful drainage and water protection; we help compare it with a pole-mounted enclosure before you choose.

Tell us which hours need full brightness, whether dimming is acceptable later and how many cloudy nights the project should cover. We match the battery and panel around that schedule and local seasonal sunlight. This makes the proposal easier to compare than a wattage label alone.

If poles are already installed, we help check the connection and panel support before recommending new hardware. For a full package, we itemise lamps, panels, batteries, controllers, poles, arms and anchor bolts. We also agree the drawings, sample requirements and spare parts needed for your project.

What the Separate Components Let You Do

A split system gives you room to arrange the solar panel and battery around the site. It is worth considering when panel orientation, storage capacity or access for repairs matters more than the smallest number of parts.

Separated Component Layout

Lamp head, solar panel, battery, and controller can be arranged separately. This gives more freedom for road projects, special pole structures, and maintenance planning.

Flexible Battery Access

Battery position can be planned for easier inspection, replacement, heat control, and anti-theft protection. This is useful for municipal roads, highways, and remote project sites.

PV Placement Flexibility

The solar panel can be adjusted for better direction, tilt angle, and sun exposure. This helps improve charging performance where the pole location is not ideal.

Project Installation Control

Split systems allow more installation flexibility, but wiring, cable protection, foundation, and component positioning must be confirmed before production.

Our advice: choose the structure around sunlight and future maintenance. A larger battery box is useful only if the solar panel can recharge it and the maintenance team can reach it safely.

From a Road Photo to a Clear Supply List

We help turn your site information into a lighting proposal, a component list and the documents your owner needs. You can start before every measurement is available.

Already have poles or local installation arranged? We can prepare an equipment-only proposal and identify the connections and parts your team will need.

Product & Component Set

We list the lamp, panel, new battery, controller, cables and mounting hardware for your selected system. Poles, arms and anchor bolts can be included when you need a complete package.

Compare quotations with the same components and delivery scope.

Configuration Review

We use road dimensions and the required lighting effect to select the lamp and optic, then match the panel and battery to the nightly schedule and local sunlight.

See how the lighting proposal and energy configuration fit together.

Engineering Documents

Send the consultant’s checklist or tender format. We help organise product data, drawings, BOQ details and the photometric information for the proposed lamp.

Give your owner a clear package to review, with the selected configuration identified.

Packing, Labels & Handover Support

We agree spare-part quantities before dispatch and keep the component list, labels and installation information aligned with your order.

Make receiving, installation and later maintenance easier for your team.

Featured Split Solar Street Light Series

Start with the external-battery system or explore the single- and double-arm pole layouts. We help match the chosen lamp, solar panel and storage to your site.

SL-SPL-HC split solar street light with PV module underside, pole-mounted external enclosure and road luminaire.

SL-SPL-HC

Separate panel and external battery enclosure

SL-SPL-HC gives you an above-ground enclosure and a separate solar panel. It is a useful starting point when battery access and a coordinated road-lighting package are priorities.

Explore the series for configuration details, then send the road layout for a proposal.

Dual-arm solar light pole for split solar street lighting applications

SL-PLUS Double Arm

Double-Arm Split Solar Street Light Kit

Coordinates the pole, two luminaire arms, base plate and anchor bolt interface for project layout review. The PV, battery and luminaire configuration should be confirmed against the road geometry, operating profile and site conditions.

Best for: Wider roads and dual-side lighting layouts that need a coordinated double-arm pole arrangement.

Quick Selection Guide

Compare the arrangements below with the space available on your site. Panel supports, lamp arms and service access can change the installation even when two systems have a similar lamp rating.

For a complete pole package, explore SL-PLUS Single Arm or SL-PLUS Double Arm.

SL-PLUS-01 split solar street light model

SL-PLUS-01

Road Lighting

Best for: Standard split solar street light projects with separated solar panel, lamp head, and battery arrangement.

Key inputs: Road width, pole height, spacing, working hours.

SL-PLUS-02 split solar street light model

SL-PLUS-02

Municipal Roads

Best for: Municipal road or public area projects requiring flexible PV placement and separated component layout.

Key inputs: Pole location, panel direction, target lux, backup days.

SL-PLUS-03 split solar street light model

SL-PLUS-03

Highway / Main Road

Best for: Road projects where lighting distribution, pole spacing, and DIALux review need to be confirmed before quotation.

Key inputs: Road class, lane width, pole spacing, IES / DIALux needs.

SL-PLUS-04 split solar street light model

SL-PLUS-04

Project Configuration

Best for: Projects needing customized component position, battery access, or BOQ-based model selection.

Key inputs: BOQ, drawings, working profile, battery box location.

SL-PLUS-05 split solar street light model

SL-PLUS-05

Flexible Layout

Best for: Sites where solar panel position, shading, or battery maintenance access requires special planning.

Key inputs: Panel direction, shading condition, cable route, backup days.

SL-PLUS-RY split solar street light model

SL-PLUS-RY

Public Area

Best for: Roadside, campus, park, or public area projects needing separated system configuration.

Key inputs: Area size, mounting height, lighting target, control mode.

SL-PLUS-GL split solar street light model

SL-PLUS-GL

Multi-Head / Area Lighting

Best for: Large-area or special pole layouts where lamp head arrangement and solar charging layout need review.

Key inputs: Mounting structure, lamp quantity, area size, target lux.

SL-PLUS-SM split solar street light model

SL-PLUS-SM

Smart / Camera Option

Best for: Split solar lighting projects that may include camera, monitoring, communication, or smart control requirements.

Key inputs: Camera load, communication method, monitoring needs, power profile.

For existing poles, send the pole-top diameter, arm dimensions and a photo of the mounting position. We help check which parts can be reused and which connections need a different bracket.

We can supply a complete package or the equipment needed for your existing poles. Groundworks, local installation and freight are shown separately when comparing the delivered cost.

Choose a Split Solar Light by Mounting Height

Start with the proposed luminaire height. Follow the guide for your layout to plan the separate panel, equipment access and the work each supplier is responsible for.

5 m Split Solar Street Light

Find a panel position that can charge while the light serves a shaded path.

6 m Split Solar Street Light

Count pole positions and light heads, then check what is in each kit.

7 m Split Solar Street Light

Choose where the battery sits and how the service crew gets to it.

8 m Split Solar Street Light

Keep the equipment schedule and drawings aligned when comparing configurations.

9 m Split Solar Street Light

Assign responsibility for interfaces when the light and pole come from different suppliers.

10 m Split Solar Street Light

Balance road coverage with the wind load and access for a separate panel.

11 m Split Solar Street Light

Plan how the installer and maintenance crew will handle components at height.

12 m Split Solar Street Light

Approve the lighting, bracket and foundations against one set of project documents.

A complete system, built around your road

Compare the Whole System,
Then Compare the Price

Two quotations marked with the same wattage may include very different batteries, panels and operating schedules. We help compare actual lamp power, light output, stored energy and the hours of useful lighting, alongside poles, hardware, freight and installation.

For a double-arm layout, include both lamps in the energy demand. A larger solar panel or battery should solve a specific charging or runtime requirement, rather than simply make a quotation look more powerful.

What Makes a Fair Comparison?

Compare each offer against the same road layout and lighting schedule. We can help you put the differences into a clear component list.

Single-Arm vs Double-Arm Split Solar Street Light Configuration

One arm normally serves one lighting direction; two arms can serve two sides from one pole. The pole position and photometric calculation determine whether either arrangement gives the coverage your road needs.

Best for

Single-arm: One-side road lighting, narrow roads, sidewalks, village roads, and standard public area lighting.

Double-arm: Two-side coverage from one pole, wider roads, central medians, parking areas, and larger public spaces.

Coverage goal

Single-arm: Focused lighting on one side or one carriageway direction.

Double-arm: Balanced lighting to two sides or wider coverage area, depending on pole location and road layout.

Pole and bracket

Single-arm: Simpler arm structure and easier pole/bracket coordination.

Double-arm: Requires stronger bracket review, arm symmetry, wind load consideration, and cable routing planning.

PV panel and battery layout

Single-arm: Usually easier to arrange PV panel and battery box, depending on pole position and shading.

Double-arm: Needs more careful review of PV placement, battery box location, cable length, and maintenance access.

Installation complexity

Single-arm: Lower installation complexity and fewer wiring coordination points.

Double-arm: Higher installation coordination; wiring, arm alignment, and component position should be confirmed before production.

Information for Your Installer

Single-arm: Datasheet, IES/LDT, DIALux layout, model matching notes, and quotation configuration.

Double-arm: Datasheet, IES/LDT, DIALux layout, bracket or pole coordination notes, BOQ matching, and wiring reference where applicable.

Tell us whether poles sit at the road edge, in a median or beside a footpath. We help compare the lamp arrangement with the actual road width and required lighting levels.

Documents for Your Tender and Installation

Send the owner’s document list and submission date. We help prepare a package around the selected lamp, solar panel, battery, controller and pole arrangement, so your team can answer technical questions with consistent information.

Tell us the required standards or report names. We help identify the relevant files for the proposed equipment and organise any project-specific information your reviewer needs.

Photometric / Optical Files

Can provide: IES / LDT files, light distribution data, DIALux / Relux layout support where applicable

Purpose: Lighting simulation, pole spacing review, target lux and uniformity discussion

We match the file to the chosen lamp and optic.

Product Datasheets

Can provide: Product datasheet, component specification, system configuration notes, model matching notes

Purpose: Technical comparison, consultant review, BOQ matching, and procurement approval

The selected component list keeps comparisons consistent.

Drawings / Installation References

Can provide: Product drawing, mounting reference, wiring reference, battery box location note, foundation or pole coordination note where applicable

Purpose: Installation planning, site coordination, cable routing, and pole/bracket confirmation

We coordinate the supplied parts with your installer’s connections.

Battery / Solar Component References

Can provide: Battery specification, solar panel specification, controller information, charging and working profile notes

Purpose: System sizing review, autonomy discussion, and maintenance planning

Use the agreed night-time schedule to compare storage and charging.

Compliance / Test References

We help match the requested standards and transport documents to the selected equipment.

Purpose: Tender document review, procurement compliance, import preparation, and consultant clarification

Send the named test requirements so we can match the relevant reports to the proposed equipment.

Packing / Shipment Documents

Can provide: Packing list, carton label, project label, shipping mark, loading photo, package reference, and spare parts list where applicable

Purpose: Shipment checking, warehouse receiving, site distribution, and handover control

Agree markings and spare parts before dispatch.

Lamp Head Options for Road and Area Lighting Needs

The lamp shape is only part of the choice. We look at where the light falls on the carriageway and footpath, whether there are dark patches between poles and how glare may affect nearby homes.

Send road width, mounting height and pole spacing. We help select an available optic and use its matching IES file for the lighting calculation.

Road Optics Lamp Head

Road Optics Lamp Head

Type II / Type III road distribution review for pole spacing and uniformity.
Area Lighting Lamp Head

Area Lighting Lamp Head

Wider beam review for parking, campus, park, and public area lighting.
IES / DIALux Matching Head

Match the Lamp and IES File

Use the photometric file for the selected lamp and optic when comparing the proposed layout.
Double-Head Road Option

Double-Head Road Option

Dual lighting direction for central medians, wider roads, and larger public spaces.

Roadway Optical Distribution

Confirm road width, pole height, spacing, mounting side, target lux, and IES / DIALux needs.

Area & Public Space Lighting

Review beam spread, mounting height, glare control, and required uniformity for public spaces.

Modular Lamp Head Options

Check heat dissipation, maintenance access, bracket compatibility, and spare parts planning.

IES & DIALux Matching

Connect the lamp head choice with photometric files, BOQ, drawings, and consultant document review.

Manufacturing & Quality Control

Your approved sample and component list give the production team and your receiving team the same reference. We organise the selected parts, inspection information and packing details around that agreed order.

Before production, we confirm the sample and component list with you. If a part needs to change, we discuss the effect on lighting, mounting or maintenance and work through the owner’s approval before using the replacement.

Production Process Review

Prepare the Agreed Components

We use the agreed configuration to coordinate components and batch preparation.
Assembly & Testing

Assembly & Testing

Solar street light assembly and test references before packing and delivery.
Pole Fabrication

Pole Fabrication

Welding, fabrication, and pole coordination references where project scope includes poles.
Loading & Shipment

Loading & Shipment

Container loading and shipment evidence for order handover and receiving checks.
Packing Standard

Packing Standard

Carton, pallet, and protective packing references by product size and shipment method.
Battery power unit assembly and wiring check for solar lighting system matching

Battery & Controller Check

We match battery voltage, controller settings and panel configuration, with service information for your maintenance team.

Solar Lighting in Real Road Conditions

These Abuja, Nigeria photographs show night-time lighting and on-site assembly from the same project. We supplied the complete solar street-light package: lamps, panels, batteries, controllers, poles and anchor bolts.
Solar street lighting at night in the Abuja, Nigeria project supplied by Sunlurio
Solar street light equipment being assembled on site for the Abuja, Nigeria project

What This Helps You Plan

Want to compare a similar site? Tell us the road width, mounting height and lighting schedule. We help you identify the useful similarities and prepare a proposal for your own road.

How to Choose the Right Split System Configuration

The right configuration starts with the road and the hours people use it. Tell us when full brightness is needed and when lower output is acceptable. We then review local seasonal sunlight, charging time and the battery storage needed for the agreed schedule.

We use new batteries and normally recommend LiFePO4. Compare battery voltage and amp-hours together: watt-hours make storage easier to compare. A large battery still needs enough solar charging to recover after poor weather.

For very cold sites, tell us the lowest temperature and charging conditions. We arrange battery insulation for the project where needed; a housing cover alone is not a complete cold-weather solution.

Split solar street light road scene used for configuration review

Choose a Serviceable Battery Location

Split Solar Street Light Configuration Reference

Pathways / Residential Streets

Main inputs: Road width, pole height, spacing, working hours, backup days

Configuration direction: Lower to medium power split system with suitable optics and autonomy margin

Documents: Datasheet, IES / LDT, basic layout note

Urban / Municipal Roads

Main inputs: Lane width, pole height, spacing, target lux, dimming profile

Configuration direction: Medium to higher power split system with project-specific optical distribution

Documents: IES / LDT, DIALux / Relux, datasheet, BOQ notes

Highway / Main Road

Main inputs: Road class, mounting side, wind exposure, solar panel placement

Configuration direction: Higher power or customized split configuration with careful PV and battery layout

Documents: DIALux layout, drawings, wiring reference, BOQ review

Parking / Campus Areas

Main inputs: Area size, mounting height, target lux, glare control

Configuration direction: Area lighting split configuration matched with beam spread and site layout

Documents: IES / LDT, DIALux / Relux, installation reference

Tender / BOQ Projects

Main inputs: BOQ, drawings, specification, required reports, deadline

Configuration direction: Model path selected by technical specification and document package

Documents: Datasheet, IES / LDT, DIALux, drawings, deviation notes

Difference Between All-in-One, All-in-Two, and Split Solar Street Lights

Start with the installation you need to carry out and the equipment you need to maintain. Integrated systems reduce the number of separate parts; split systems offer more freedom to position the panel and battery. The useful choice is the one that fits your road and available sunlight.

All three structures can be considered for project work. We compare the lighting result, charging arrangement and maintenance access before recommending one.

All-in-One Solar Street Light

Integrated Structure

Best for: Compact appearance, fewer exposed components, faster batch installation, and simplified site work.

Check: PV angle, battery space, heat dissipation, and maintenance method should still be checked.

All-in-Two Solar Street Light

Semi-Integrated Structure

Best for: Simpler installation than split while keeping more flexibility for solar panel angle and charging direction.

Check: Panel mounting, bracket structure, battery position, and installation access should be confirmed.

Split Solar Street Light

Separated Component Structure

Best for: Flexible PV placement, larger battery options, easier battery access, and special pole layout support.

Check: Wiring route, battery box location, PV direction, cable protection, and maintenance access must be reviewed.

Component layout

All-in-One: Integrated lamp, battery, controller, and solar panel in one compact structure.

All-in-Two: Lamp / battery module plus separate or adjustable PV panel structure.

Split: Lamp head, PV panel, battery box, and controller can be arranged separately.

Installation work

All-in-One: Simpler and faster batch installation.

All-in-Two: Moderate installation work with more PV angle flexibility.

Split: More site coordination, wiring, and component positioning work.

PV panel flexibility

All-in-One: Limited by integrated structure and mounting angle.

All-in-Two: Better PV angle adjustment than All-in-One.

Split: Highest flexibility for PV direction, tilt, and separate placement.

Battery access

All-in-One: Battery access depends on integrated body design.

All-in-Two: More flexible than integrated systems depending on model design.

Split: Battery box can be planned for maintenance access and anti-theft protection.

Best starting point

All-in-One: Compact municipal roads, parks, campuses, and fast installation projects.

All-in-Two: Road projects needing simpler installation with better PV angle flexibility.

Split: Road, highway, remote, or tender projects needing flexible PV/battery layout.

Documents to request

All-in-One: Datasheet, IES / LDT, DIALux support, BOQ notes.

All-in-Two: Datasheet, IES / LDT, DIALux support, drawings, BOQ notes.

Split: Datasheet, IES / LDT, DIALux support, wiring reference, drawings, BOQ matching.

Southeast Asia outdoor lighting project conditions for humid coastal and road lighting environments

FAQs

Practical answers about existing poles, battery placement, runtime, project documents and support after delivery.

No. Choose the structure around the road, sunlight, storage and maintenance needs. We can compare split, all-in-one and all-in-two systems against the same lighting target and nightly schedule, so the choice is based on what the project needs.
A Split system is suitable when the project needs flexible PV panel placement, separated battery box location, easier battery maintenance, larger autonomy planning, or special pole and wiring coordination. It is also useful when site conditions require the PV panel, lamp head, controller, and battery box to be arranged separately.
Start with the country and a short description of the road or site. A photograph, rough dimensions or the owner’s requirements are helpful. If the height, spacing or lighting target is unknown, we help you work out what to collect from the owner or installer next.
Usually yes. Compared with integrated systems, a Split system needs more coordination for PV panel installation, battery box position, cable routing, controller wiring, bracket fixing, and site protection. This is why road layout and installation conditions should be reviewed before production.
The solar panel should be positioned for better sun exposure, suitable tilt angle, and reduced shading from trees, buildings, or pole structures. The battery box should be planned for maintenance access, heat control, anti-theft protection, cable length, and safe installation. Poor planning may reduce charging efficiency or increase after-sales risk.
Send the tender checklist, BOQ and deadline. We help organise the product information, component schedule, drawings and lighting-calculation files for the proposed system. Matching the files to the selected equipment helps your consultant review the proposal and your installer use the same information later.
Do not select by wattage or product appearance alone. Lamp head, optics, battery capacity, solar panel size, dimming profile, and controller configuration should be matched with road width, pole height, spacing, target lux, working hours, backup days, and local weather conditions.
Yes, Split systems can be configured with dimming schedules, motion sensor logic, and smart control options where the project requires them. For smart or communication-based projects, please confirm control method, monitoring requirement, communication coverage, and power consumption before quotation.
We agree spare-part types and quantities before shipment. The approved component list, settings and inspection records help your team identify replacement parts and answer questions during later owner reviews or audits. If a component needs to change, we discuss it with you and work through the owner’s approval before using it. Clear records can reduce disputes that delay acceptance or final payment.

Let’s Plan Your Split Lighting System

Tell us where the lights will be installed and what you need help with. A short question is enough to start; photos, dimensions and tender documents can follow in our reply.

PLANNING A SOLAR STREET LIGHTING PROJECT?

Share your project location, estimated quantity and requirements.
We’ll review the suitable configuration and supply scope for your project.