LED Street Light

LED Street Lights for Municipal Road & Retrofit Projects

AC grid road luminaires configured by road width, pole height, spacing, optics, driver, SPD, voltage, and required IES / DIALux documents — not by wattage alone.

AC LED Street Light Project Inputs for EPC Review

Before recommending a model or preparing a LED street light quotation, we review road width, pole height, pole spacing, mounting method, voltage, optics, driver, SPD, target lighting level, and required engineering documents.

Model Recommendation

Share road width, pole height, spacing, mounting arm, voltage, and lighting target so we can recommend a suitable AC LED street light model.

IES / DIALux Review

For consultant or EPC review, we can support IES/LDT files and DIALux / Relux lighting simulation after project inputs are confirmed.

Tender Document Pack

For BOQ or tender-stage projects, we can help prepare datasheet, model mapping notes, drawings, IES/LDT, and technical clarification support where applicable.

What Buyers Should Confirm Before Quotation

A wattage-based quotation may cause wrong optics, wrong mounting, poor uniformity, failed acceptance, or unnecessary rework. Please confirm the following inputs before AC LED street light model selection for municipal road lighting, retrofit project, BOQ, IES / LDT, DIALux / Relux, and tender documents.

Road Width / Area Size

Confirm carriageway width, lanes, sidewalk, parking area, or yard size.

Pole Height

Confirm existing or planned pole height and whether the project is new-build or retrofit.

Pole Spacing

Confirm distance between poles and whether poles are single-side, double-side, or staggered.

Mounting Arm

Confirm arm length, arm angle, top diameter, side-entry or post-top mounting.

Voltage & Grid Condition

Confirm AC voltage, grid stability, surge risk, and cabinet or wiring condition.

Optics & Lighting Target

Confirm target lux, uniformity, lighting class, beam distribution, and road application.

Driver, SPD & Protection

Confirm driver requirement, SPD level, IP/IK requirement, temperature, humidity, and coastal conditions.

Required Documents

Confirm whether datasheet, IES/LDT, DIALux, drawings, BOQ notes, or tender support are required.

Engineering Note: Do Not Select LED Street Lights by Wattage Only

The same wattage can produce different lighting results depending on optical lens, LED efficiency, pole height, spacing, road width, mounting angle, driver, SPD, and project requirements. For EPC, municipal, and retrofit projects, model selection should be checked with project inputs and document requirements before quotation.

Quick Selection Guide for AC LED Street Light Models

Use this guide as a starting point for LED street light models and model recommendation discussion. Final selection for each road lighting project, retrofit replacement, or municipal lighting program should be confirmed by road width, pole height, spacing, optics, voltage, SPD level, datasheet needs, and required IES / DIALux support or tender documents.

SL-AC-JG

Best for:Municipal road lighting and standard AC street light replacement projects.

Confirm:Road width, pole height, spacing, arm size, voltage, and target lighting level.

Documents:Datasheet, IES/LDT, DIALux support, and BOQ matching notes where required.

SL-AC-JG01

Best for:Public road programs that need consistent appearance, repeat ordering, and stable model selection.

Confirm:Project quantity, pole layout, voltage, SPD level, optics, and required tender documents.

Documents:Datasheet, IES/LDT, model mapping, and project document pack.

SL-AC-ABS

Best for:High-lumen public roads, wide roads, and area lighting applications requiring stronger output.

Confirm:Mounting height, road width, target lux, uniformity, heat dissipation, and SPD level.

Documents:IES/LDT, DIALux / Relux support, datasheet, and technical review notes.

SL-AC-JG02

Best for:General AC road lighting and project-based replacement programs.

Confirm:Existing pole height, arm type, input voltage, road width, and installation environment.

Documents:Datasheet, IES/LDT, drawings where applicable, and BOQ matching notes.

SL-AC-DR03

Best for:Modern road retrofit projects and street lighting replacement applications.

Confirm:Existing luminaire type, mounting arm, pole spacing, voltage, and lighting target.

Documents:Datasheet, IES/LDT, retrofit comparison notes, and DIALux support where required.

SL-AC-WM

Best for:Compact roadway, parking area, campus road, and public-area replacement projects.

Confirm:Mounting height, installation method, voltage, area size, and target illumination.

Documents:Datasheet, IES/LDT, basic layout support, and model recommendation notes.

SL-AC-RD02

Best for:Road, municipal, commercial, and parking lighting projects requiring flexible model selection.

Confirm:Pole spacing, mounting height, beam distribution, SPD requirement, and ambient condition.

Documents:Datasheet, IES/LDT, DIALux support, and tender document pack where applicable.

SL-AC-YSM

Best for:Export-specific road lighting projects requiring appearance review and configuration matching.

Confirm:Country, voltage, project standard, road type, pole height, and required document list.

Documents:Datasheet, IES/LDT, model confirmation, and BOQ / tender support where required.

AC LED Street Light Series Overview

Select a starting series by road type, pole arrangement, mounting method, optical distribution, voltage, SPD level, and required engineering documents. Final model selection should be confirmed with project inputs and lighting files.

EPLUS SA — Single-Arm Road Lighting

Best for:Urban roads, municipal streets, industrial access roads, and standard single-arm pole layouts.

Key review points:Pole height, road width, pole spacing, arm length, voltage, optics, SPD, and required IES / DIALux files.

EPLUS DA — Double-Arm Road Lighting

Best for:Boulevards, dual carriageways, highways, campus roads, and center-pole double-arm installations.

Key review points:Road arrangement, two-side distribution, mounting height, arm configuration, optical layout, and lighting uniformity.

EPLUS-JG — Retrofit Street Light Head

Best for:Existing pole retrofit, luminaire replacement, municipal upgrade programs, and BOQ-based replacement projects.

Key review points:Existing pole arm, mounting interface, voltage, target lighting level, old fixture replacement, and tender document mapping.

Series Selection Matrix

Series

Typical Application

Main Project Inputs

Document Support

Recommended Start Point

EPLUS SA

Single-arm municipal road lighting, urban street, industrial access road

Road width, pole height, spacing, arm length, voltage, optics, SPD

Datasheet, IES/LDT, DIALux support, BOQ notes where required

Use for standard single-arm road lighting and new-build municipal projects

EPLUS DA

Double-arm road lighting, boulevard, highway, dual carriageway, campus road

Pole arrangement, two-side distribution, mounting height, uniformity target, arm configuration

IES/LDT, DIALux / Relux support, datasheet, technical review notes

Use for center-pole or double-arm lighting layouts

EPLUS-JG

Street light head replacement, existing pole retrofit, municipal upgrade program

Existing arm, top diameter, mounting method, voltage, old fixture type, target lighting level

Datasheet, retrofit notes, IES/LDT, BOQ model mapping

Use when poles remain but luminaires need replacement

EPLUS SA

Typical Application: Single-arm municipal road lighting, urban street, industrial access road

Main Project Inputs: Road width, pole height, spacing, arm length, voltage, optics, SPD

Document Support: Datasheet, IES/LDT, DIALux support, BOQ notes where required

Recommended Start Point: Use for standard single-arm road lighting and new-build municipal projects

EPLUS DA

Typical Application: Double-arm road lighting, boulevard, highway, dual carriageway, campus road

Main Project Inputs: Pole arrangement, two-side distribution, mounting height, uniformity target, arm configuration

Document Support: IES/LDT, DIALux / Relux support, datasheet, technical review notes

Recommended Start Point: Use for center-pole or double-arm lighting layouts

EPLUS-JG

Typical Application: Street light head replacement, existing pole retrofit, municipal upgrade program

Main Project Inputs: Existing arm, top diameter, mounting method, voltage, old fixture type, target lighting level

Document Support: Datasheet, retrofit notes, IES/LDT, BOQ model mapping

Recommended Start Point: Use when poles remain but luminaires need replacement

EPLUS SA — Single-Arm LED Street Light

For municipal roads, urban streets, industrial access roads, and standard single-arm pole layouts.

EPLUS SA is used when the project requires a practical AC LED street light for single-arm road lighting. Model selection should be checked against pole height, road width, pole spacing, mounting arm, voltage, optical distribution, SPD requirement, and required engineering documents.

For single-arm road and street lighting layouts
Suitable for municipal roads, industrial roads, and access roads
Review road width, pole height, spacing, and mounting arm before quotation
IES/LDT and DIALux / Relux support can be prepared after project inputs are confirmed
Datasheet and BOQ matching notes are available where applicable

EPLUS DA — Double-Arm LED Street Light

For double-arm poles, boulevards, dual carriageways, highway sections, and wider road lighting layouts.

EPLUS DA is used for projects where one pole supports lighting on two sides or where wider road layouts require coordinated optical distribution. Before selection, confirm pole arrangement, mounting height, arm direction, road width, target lighting class, voltage, SPD level, and simulation requirements.

For double-arm road lighting and center-pole layouts
Suitable for boulevards, dual carriageways, highways, and wide municipal roads
Check two-side optical distribution and uniformity requirements
Confirm mounting arm, pole height, road width, and spacing before selection
IES/LDT and DIALux / Relux review can support consultant or tender-stage projects

EPLUS-JG — LED Street Light Head / Retrofit Lighting

For replacing old street light heads on existing poles, municipal retrofit programs, and BOQ-based replacement projects.

EPLUS-JG is used when the project keeps the existing poles but replaces the luminaire head. Retrofit selection should review existing arm size, mounting interface, pole height, road width, voltage, old fixture type, lighting target, and required document support.

For existing pole retrofit and luminaire replacement
Suitable for municipal upgrade programs and road lighting renovation
Check existing mounting arm, top diameter, voltage, and wiring condition
Useful for BOQ model mapping and tender clarification
Datasheet, IES/LDT, retrofit notes, and DIALux support can be prepared where required

Need help matching a series to your road lighting project?

Send road width, pole height, spacing, mounting arm, voltage, lighting target, and required documents. We will review the suitable LED street light series and document path.

What We Deliver for LED Street Light Projects

From model recommendation to lighting document support, we help EPC, municipal, retrofit, and tender-stage buyers review the correct AC LED street light path before quotation or procurement.

Project Support Deliverables

Use these deliverables to align model selection, lighting review, procurement schedule, and document preparation before order confirmation.

Model Recommendation

We review road width, pole height, spacing, mounting arm, voltage, optics, SPD level, and project requirements to recommend a suitable AC LED street light path.

Why it mattersAvoids wattage-only selection and wrong fixture matching.

Lighting Layout Support

IES/LDT files and DIALux / Relux support can be prepared after road layout, mounting height, spacing, target lux, and product configuration are confirmed.

Why it mattersSupports consultant review, EPC comparison, and tender-stage lighting checks.

Lead Time & Shipment Plan

We help review order quantity, packaging method, shipment schedule, and project delivery stage so procurement timing can match site or tender requirements.

Why it mattersReduces delivery uncertainty for EPC and municipal replacement programs.

Warranty, Spares & Installation Path

Warranty terms, spare parts, installation guidance, and handover documents can be reviewed according to confirmed project scope and product configuration.

Why it mattersHelps long-term maintenance planning and after-sales coordination.

Core Components for AC Road Lighting Reliability

A reliable road lighting project depends on more than LED wattage. Optical distribution, driver quality, surge protection, housing design, mounting compatibility, and environmental protection all affect lighting result and maintenance cost.

Technical check

Optical Distribution

Lens type and beam distribution should match road width, pole height, pole spacing, mounting angle, and target lighting level.

Key checkConfirm Type II / Type III or required optical distribution before IES / DIALux review.

Technical check

LED Driver & SPD

Driver configuration and surge protection should match voltage, grid condition, cabinet status, lightning risk, and site environment.

Key checkConfirm AC input voltage, SPD level, and grid stability before quotation.

Technical check

Housing & Heat Dissipation

Housing structure, thermal design, sealing, coating, and surface protection affect long-term performance in hot, humid, dusty, or coastal environments.

Key checkConfirm ambient temperature, humidity, coastal exposure, and IP / IK requirements.

Technical check

Mounting & Pole Interface

Side-entry, post-top, arm length, arm angle, top diameter, and existing pole condition must be checked before retrofit or new installation.

Key checkConfirm pole height, arm size, mounting diameter, and installation method.

Need a model and document path for your LED street light project?

Send road width, pole height, spacing, mounting method, voltage, target lighting level, and required documents. We will review the suitable series, component path, and available engineering files.

Manufacturing & Quality Evidence for LED Street Light Projects

Real production and inspection references help buyers review housing, optical components, driver / SPD configuration, assembly, aging test, labeling, packaging, and shipment preparation before project delivery.

Housing & Surface Review

Housing structure, heat dissipation, coating, sealing, and mechanical fit should be checked according to project environment and installation method.

Project relevanceImportant for hot, humid, dusty, coastal, or long-term municipal road lighting projects.

Optics & LED Module Check

Optical lens, LED module, beam distribution, CCT, and product configuration should match the selected road lighting application.

Project relevanceSupports IES / DIALux review, road lighting effect, and consultant approval.

Driver, SPD & Wiring Review

Driver, SPD, wiring, connector, input voltage, and electrical protection should be checked before bulk order and shipment.

Project relevanceReduces mismatch risk for AC grid, retrofit, and voltage-sensitive projects.

Aging Test, Label & Packing

Aging test reference, label information, packaging method, and shipment preparation help support project handover and site coordination.

Project relevanceUseful for EPC delivery, tender documents, batch inspection, and after-sales tracking.

Production & Inspection References

The following photos are production and QC references only. Available inspection records, datasheet, IES / LDT, DIALux, BOQ, and tender document support depend on confirmed product configuration, order scope, and project requirements.

Housing

Street light housings and structural parts staged before assembly.

LED Module

Optical lens and LED module fitting during fixture assembly.

Driver & Wiring

Driver compartment and wiring configuration review for AC road lighting.

Assembly

Fixture assembly and component fitting before final inspection.

Aging Test

Aging test reference for LED street light fixtures before shipment.

Photometric / Electrical Check

Photometric and electrical check reference for project document support.

Label & Traceability

Driver label and wiring identification reference before dispatch.

Packing & Shipment

Packaging and loading reference for batch order shipment preparation.

Before Shipment Review Items

For project orders, the review scope may include model confirmation, voltage, optics, driver / SPD configuration, label, packing, shipment preparation, and available document support.

01

Model & Quantity

Confirm selected model, quantity, mounting method, and project schedule.

02

Voltage & Driver

Check AC input voltage, driver configuration, and wiring requirement.

03

Optics / IES File

Confirm optical distribution and available IES/LDT file for lighting review.

04

SPD & Protection

Review surge protection, IP/IK requirement, and installation environment.

05

Label & Packing

Check model label, carton mark, packing method, and traceability information.

06

Shipment Documents

Review packing list, invoice, document pack, or tender files where applicable.

Review manufacturing and QC evidence for your LED street light order

Send the project model, quantity, voltage, required documents, and inspection focus. We will review the available production, QC, packing, and document support path according to confirmed project scope.

PROJECT REFERENCES

Reference Projects for Road Lighting

Selected Public Road and Infrastructure Lighting References

Selected references from public roads, industrial areas, and infrastructure lighting programs. Detailed configuration files can be shared according to project relevance and confidentiality conditions.

Project Reference List

FAQ for AC LED Street Light Projects

Common questions for EPC, municipal, retrofit, consultant, and tender-stage buyers before model selection, lighting review, or quotation.

Before You Ask for Price

For AC LED street light projects, quotation should be based on road width, pole height, pole spacing, mounting arm, voltage, optics, SPD level, project environment, and required documents. A wattage-only request may lead to wrong model selection or failed lighting expectations.

What information is needed before recommending an LED street light model?

For an AC LED street light project, please share the project country, road width or area size, pole height, pole spacing, mounting arm, input voltage, target lighting level, and required documents. If you have BOQ, drawings, existing product model, or tender specifications, please send them together so we can review the suitable model path.

Can I select LED street lights by wattage only?

No. The same wattage can produce different results depending on LED efficiency, optical distribution, pole height, spacing, road width, mounting angle, driver, SPD, and installation environment. For municipal, EPC, and retrofit projects, model selection should be checked with project inputs and lighting document requirements before quotation.

Can Sunlurio support LED street light retrofit projects?

Yes. For retrofit projects, please confirm the existing pole height, arm length, mounting diameter, side-entry or post-top installation method, old fixture type, input voltage, wiring condition, and target lighting level. This helps us review whether a suitable LED street light head or road lighting fixture can match the existing site.

Can you provide IES / LDT files for LED street lights?

IES / LDT files can be provided for selected models where available and after the product configuration is confirmed. For consultant or EPC review, please also provide road width, pole height, spacing, mounting method, target lux or lighting class, and project layout requirements.

Can you provide DIALux or Relux support for road lighting projects?

DIALux / Relux support can be reviewed when project inputs are available, including road width, pole height, pole spacing, mounting angle, target lighting class, and selected luminaire configuration. The simulation result depends on confirmed project data and selected photometric files.

What SPD level should be used for AC LED street lights?

SPD selection depends on grid condition, lightning risk, project location, cabinet protection, and client specification. For many road lighting projects, surge protection is reviewed together with input voltage, driver configuration, grounding condition, and site environment. Please confirm the local grid and tender requirement before final selection.

What affects the lighting result besides luminaire power?

Road lighting performance is affected by optical distribution, LED efficiency, pole height, pole spacing, road width, mounting arm, mounting angle, CCT, driver configuration, and target uniformity. This is why IES / DIALux review and project-specific inputs are important for EPC and municipal projects.

What documents can be prepared for tender or BOQ review?

Depending on confirmed project scope and product configuration, available support may include datasheet, IES/LDT files, DIALux / Relux support, BOQ matching notes, product drawings, packing information, installation guidance, and technical clarification notes. Available documents depend on project scope, tender and BOQ requirements, and document stage.

How do I request a quotation for LED street lights?

Please submit the LED street light project configuration form with country, work email, road width or area size, pole height, spacing, mounting method, input voltage, target lighting level, and required documents. If you already have BOQ, drawings, or a tender specification, mention this in the message so our team can review the model and document path.

Request LED Street Light Project Configuration

Send your road width, pole height, spacing, mounting method, voltage, lighting target, and required documents. Our engineering team will review the suitable AC LED street light model path or document support.

What to Prepare Before Quotation

For AC LED street light projects, model selection should be reviewed by site conditions and document requirements, not wattage alone. If you have BOQ, drawings, existing product model, or tender specifications, mention them in the message.

Useful inputs:

Available documents depend on confirmed project scope, product configuration, tender requirements, and document stage.

View Engineering Support

LED Street Light RFQ Form

Fields marked with * are recommended for faster review.

If BOQ, drawings, or tender files are available, please mention them in the message. Our team will reply with the correct email or document review method.

Company Name *

Work Email *

Country / City *

Project Type

Quantity

Road Width / Area Size

Pole Height

Pole Spacing

Mounting Method

Mounting Arm / Diameter

Input Voltage

SPD / Protection Requirement

Target Lighting Requirement

Project Condition

BOQ / Drawings / Tender Specification Available?

Message / Project Requirement *

LED street light review paths

For AC LED road lighting projects, match model selection to road layout, lighting files, BOQ context, and document stage.

Submit LED Street Light Project Requirements | Request DIALux / Relux Support | Request IES / LDT File | Request Tender / BOQ Review | View Quotation Comparison Checklist

Available documents depend on confirmed project scope, product configuration, tender requirements, and document stage.

LED Street Lights for Municipal Road & Retrofit Projects

AC LED Street Light Project Inputs for EPC Review

Model Recommendation

IES / DIALux Review

Tender Document Pack

What Buyers Should Confirm Before Quotation

Road Width / Area Size

Pole Height

Pole Spacing

Mounting Arm

Voltage & Grid Condition

Optics & Lighting Target

Driver, SPD & Protection

Required Documents

Engineering Note: Do Not Select LED Street Lights by Wattage Only

Quick Selection Guide for AC LED Street Light Models

SL-AC-JG

SL-AC-JG01

SL-AC-ABS

SL-AC-JG02

SL-AC-DR03

SL-AC-WM

SL-AC-RD02

SL-AC-YSM

AC LED Street Light Series Overview

EPLUS SA — Single-Arm Road Lighting

EPLUS DA — Double-Arm Road Lighting

EPLUS-JG — Retrofit Street Light Head

Series Selection Matrix

EPLUS SA

EPLUS DA

EPLUS-JG

EPLUS SA — Single-Arm LED Street Light

EPLUS DA — Double-Arm LED Street Light

EPLUS-JG — LED Street Light Head / Retrofit Lighting

Need help matching a series to your road lighting project?

What We Deliver for LED Street Light Projects

Project Support Deliverables

Model Recommendation

Lighting Layout Support

Lead Time & Shipment Plan

Warranty, Spares & Installation Path

Core Components for AC Road Lighting Reliability

Optical Distribution

LED Driver & SPD

Housing & Heat Dissipation

Mounting & Pole Interface

Need a model and document path for your LED street light project?

Manufacturing & Quality Evidence for LED Street Light Projects

Housing & Surface Review

Optics & LED Module Check

Driver, SPD & Wiring Review

Aging Test, Label & Packing

Production & Inspection References

Before Shipment Review Items

01

Model & Quantity

02

Voltage & Driver

03

Optics / IES File

04

SPD & Protection

05

Label & Packing

06

Shipment Documents

Review manufacturing and QC evidence for your LED street light order

Reference Projects for Road Lighting

Selected Public Road and Infrastructure Lighting References

Project Reference List

FAQ for AC LED Street Light Projects

Before You Ask for Price

Request LED Street Light Project Configuration

What to Prepare Before Quotation

Useful inputs:

LED Street Light RFQ Form

LED street light review paths

Request a Project Document Pack