Lighting Engineering Support for Project-Based Outdoor Lighting
Sunlurio reviews the project conditions behind a lighting request before product selection, quotation, simulation or tender-document matching. Send the geometry, targets and files already available; the review will identify the suitable path and any missing inputs.
Engineering Support Starts with Project Inputs
A useful review starts with the site, layout, operating conditions, performance target and procurement stage. Not every input is required at first contact, but known values and unknowns should be stated clearly before an output is treated as project-specific.
Submit the available project conditions and files first.
Sunlurio will check missing information, identify the likely Product and Engineering path, and define whether the next step is clarification, preliminary configuration, quotation, simulation, drawing review or controlled document mapping.
Project input review covering road geometry, luminaire selection, control scope, pole interfaces and document requirements.
Project Location
Country / city, project type, road class, site environment and corrosion or wind conditions.
Geometry & Quantity
Road width or area size, pole or mounting height, spacing, quantity and project stage.
Solar Runtime Inputs
Working hours, dimming schedule, backup days and product type where solar is involved.
Tender Documents
BOQ, drawings, tender specification and required document list where available.
Three Project Paths
Choose the route that matches the next procurement or technical decision. The same project may move through more than one path as inputs and scope are confirmed.
Preparing a Quotation
Choose this route when the project stage and buyer role match the sequence below.
- Submit Project Inputs
- Confirm Product Path
- Review Missing Information
- Preliminary Configuration
- Project-Based Quotation
Preparing a Tender
Choose this route when the project stage and buyer role match the sequence below.
- Upload BOQ / Specification
- Review Compliance Gaps
- Confirm Product Scope
- Map Documents
- Release Appropriate Pack
Consultant / Technical Review
Choose this route when the project stage and buyer role match the sequence below.
- Submit CAD / Geometry
- Confirm Lighting Targets
- Match IES / LDT
- DIALux / Relux Review
- Drawings / Datasheets
Project Input Requirements
Different lighting systems require different starting data. Missing geometry, power, runtime or document inputs can change the configuration and the available document path.
Send what is available and identify what is still unknown. The required inputs vary by application, Product path, project stage and requested output; missing data will be listed before a configuration or file is treated as project-specific.
Solar Street Light
Prepare these inputs before requesting configuration review or document support.
- country / city and installation environment
- application and quantity
- road or site dimensions
- pole height, spacing and arrangement
- target lighting criteria where specified
- working hours and dimming schedule
- autonomy or backup-day target
- solar resource or shading information where available
- BOQ, specification, CAD or drawing
- required documents and tender deadline if relevant
LED Street Light
Prepare these inputs before requesting configuration review or document support.
- country / location and application
- quantity and road or site geometry
- pole or mounting height and spacing
- voltage / frequency and supply condition
- target illuminance and uniformity where specified
- optic or beam requirement
- driver, surge protection and control requirement
- CAD, BOQ, specification and required documents
- tender deadline if relevant
Smart Street Light
Prepare these inputs before requesting configuration review or document support.
- project location, application and quantity
- lighting layout and luminaire requirement
- control and dimming method
- communication path and platform requirement
- GPS, fault alerts and monitoring needs
- cabinet, power and network conditions
- data / API and owner-system boundary
- BOQ, interface documents and tender deadline if relevant
High Mast
Prepare these inputs before requesting configuration review or document support.
- project location and application
- area dimensions and obstruction zones
- quantity, preferred mast height and mounting plan if known
- target illuminance, uniformity and aiming constraints
- wind basis and corrosion environment
- lifting system and control-cabinet requirements
- soil, foundation or anchor information where available
- CAD, BOQ, drawings, required documents and deadline if relevant
Lighting Pole
Prepare these inputs before requesting configuration review or document support.
- project location, application and quantity
- pole height, arm type and luminaire load
- mounting interface, flange and anchor-bolt requirements
- material, section and surface treatment
- wind basis and corrosion category
- soil or foundation information where available
- reference, approval or final-drawing purpose
- BOQ, specification and required deadline if relevant
LED Flood Light
Prepare these inputs before requesting configuration review or document support.
- project location, application and quantity
- area dimensions and mounting positions
- mounting height and obstruction zones
- target illuminance and uniformity where specified
- beam or aiming constraints
- AC or solar power path and operating profile
- control requirements
- layout, CAD, BOQ and IES / DIALux review purpose
- tender deadline if relevant
How Sunlurio Reviews a Lighting Project
- Classify the request — confirm the country, application, buyer role, project stage and next decision.
- Check the inputs — identify available geometry, targets, operating conditions, files and missing information.
- Confirm the Product and technical path — review system type, mounting, optics, power, controls and environmental risks.
- Map engineering and document support — identify the relevant photometric, simulation, drawing, datasheet, BOQ or tender route and its release level.
- Return the next action — provide a clarification list, preliminary configuration direction, quotation route or controlled document-review path.
This review does not replace consultant approval, local authority review, site investigation, structural design or required testing.
Main Configuration Risks
Engineering review identifies assumptions, missing inputs and configuration, file or tender mismatches before quotation or submission. Final results remain subject to confirmed inputs, scope and the applicable review responsibility.
Wattage-Only Selection
Choosing only by wattage can miss road width, optics, pole height, spacing and target lux.
Missing Geometry
Road width, pole height, mounting height or area dimensions are needed before meaningful review.
Solar Undersizing
Working hours, dimming schedule and backup-day assumptions affect battery and PV sizing.
Wrong Photometric File
IES / LDT files must match model, optics and project purpose before simulation use.
Unverified Lighting Targets
Catalogue values do not replace a layout review when a tender, consultant or acceptance criterion defines illuminance, uniformity, mounting or glare requirements.
Pole / Foundation Risk
Wind load, corrosion, flange, anchor bolts and foundation assumptions must be bounded.
Environment & Control Risk
Temperature, coastal corrosion, humidity, dust, surge exposure, communications and control interfaces can change material, driver, system and maintenance decisions.
Tender Document Mismatch
BOQ, drawings, datasheets and compliance documents must match the confirmed product scope.
Engineering Deliverables
Depending on project stage and confirmed inputs, an engineering review may produce preliminary configuration direction, clarification notes, photometric or drawing routes, document mapping, or BOQ/compliance support. No output or file is automatic.
Product & Photometric Files
Datasheets, model-matched IES / LDT files and DIALux / Relux review paths are confirmed against the proposed luminaire, optics, mounting condition and project purpose.
- datasheet
- IES / LDT path
- DIALux / Relux review
- optics / model matching
Drawings & System References
Datasheets, product drawings, pole interfaces, foundation references, wiring diagrams and control architecture are released according to the confirmed project scope.
- product drawing
- pole drawing
- foundation reference
- wiring diagram
- smart control architecture
Tender & Handover Support
BOQ matching notes, technical clarification, packing references, installation guidance and acceptance documents are mapped to the confirmed product and tender stage.
- BOQ matching notes
- packing list
- installation guide
- acceptance / handover checklist
Document Availability Levels
Available documents depend on confirmed project scope, product configuration, tender requirements, and document stage.
Public Sample / General Guidance
Public sample. General materials can guide early review without implying project-specific document release.
- catalog
- public checklist
- generic input sheet
- sample datasheet
Request After Basic Project Information
Project info required. Samples and review materials are shared only after the buyer provides enough context for safe matching.
- redacted IES / DIALux sample
- sample BOQ matching sheet
- pre-shipment checklist
- acceptance checklist
- selected compliance documents
Engineering Review Only
Engineering review required. Project-specific files are not public downloads and must match confirmed model, optics, drawing scope and tender purpose.
- actual product IES / LDT
- project-specific DIALux report
- matched datasheet
- BOQ compliance matrix
- technical deviation sheet
- pole drawing
- foundation drawing / reference
- anchor bolt layout
- wiring diagram
- smart control architecture
- full certificate / test report set
- full tender document pack
Use Request / Available on request / Engineering review required instead of public download buttons.
Engineering Tools & Document Paths
Use these input, review and preparation paths to match geometry, photometric files, drawings, Product scope or tender documents. They support the project workflow but do not provide automatic final design or approval.
Simulation path
DIALux / Relux Simulation
Review road or area geometry, maintained illuminance, uniformity and layout assumptions.
File-matching path
IES / LDT Photometric Files
Request files matched to the proposed model, optics, wattage and mounting condition.
Document path
Drawings & Datasheets
Confirm datasheets, product drawings, pole interfaces and reference document availability.
Tender path
Tender Documents & BOQ
Map BOQ lines, compliance gaps, required files and submission boundaries.
Review method
Project Lighting Method
See how project inputs are checked before configuration, simulation and quotation.
Calculation guide
High Mast Calculation Guide
Use this calculation guide to prepare area, mast-height and luminaire-count assumptions before detailed review. It is not a final layout, structural design or guaranteed configuration.
Tender Starter Pack
Prepare the minimum project and procurement information before opening the governed Tender / BOQ review path. This section is an intake checklist, not a duplicate tender workflow or a promise of a complete document pack.
- project country and application
- BOQ and tender specification
- site plan, road layout, CAD or drawings
- lighting criteria or applicable standard
- proposed Product/model if already specified
- quantities, power or solar conditions and controls
- required compliance and document list
- submission purpose and tender deadline if relevant
BOQ / Specification Review
Sunlurio can identify missing inputs, Product-scope questions, BOQ or specification gaps and the appropriate preliminary review path.
Document Mapping
Datasheets, drawings, IES/LDT, DIALux/Relux, compliance evidence and Tender Pack requirements are mapped to the confirmed scope and document-release level.
Related Products
Engineering review normally starts by confirming the product path before document or simulation support.
Solar Street Light
Solar lighting inputs, backup days, dimming schedule and road geometry.
LED Street Light
AC road lighting review for voltage, optics, lux target and SPD.
Smart Street Light
Control method, communication path, platform and data interface review.
High Mast Light
Area lighting, mast height, floodlight quantity, wind speed and lifting system inputs.
Lighting Pole
Pole height, material, flange, anchor bolt, wind speed and drawing requirement.
LED Flood Light
Area dimensions, beam angle, mounting height, lux target and DIALux / IES path.
Related Projects
These public references are used as safe examples of project context, product category and review boundary. They are not presented as universal document proof.
Togo Road & Highway Solar Street Lighting
Solar road lighting reference for country, road width, pole height and backup-day review.
Ethiopia Smart Lighting Project
Smart lighting reference with safe control-scope and document boundary framing.
Tema Port High Mast Lighting Project
High mast reference for port-area lighting, wind load and commissioning review.
Vietnam AC LED Street Lighting Project
AC LED street lighting reference for pole height, optics and driver / SPD review.
Engineering Support FAQ
Send the country and location, application, quantity, road or area geometry, pole or mounting height, spacing, operating requirements, power or solar conditions, controls, environment and any BOQ, drawing or specification already available. Unknown inputs can be marked for clarification.
DIALux / Relux review can be supported after project geometry, target requirements, luminaire model and document purpose are confirmed.
IES / LDT support depends on confirmed product model, optics, project purpose and document stage. Actual project files are not treated as public downloads.
Yes. BOQ and tender specifications can be reviewed for product scope, compliance gaps, missing inputs and document mapping.
Pole drawings and foundation references may be reviewed after pole height, wind speed, material, flange, anchor bolts and project scope are confirmed.
No. Some files are public samples, some are available after basic project information, and some require engineering review.
Yes. Submit the available project conditions and choose the closest product path or explain that the product type is not confirmed.
The engineering team reviews the inputs and replies with a suitable configuration direction, missing-information list, quotation path or document-support path.
Need Engineering Review Before Quotation or Tender Submission?
Send the project conditions, targets and files already available. Sunlurio will review the starting point, identify missing inputs and route the request to the appropriate configuration, quotation, simulation or document-support path.