START PROJECT REVIEW

All-in-One Solar Street Lights for Roads & Public Areas

Sunlurio manufactures All-in-One solar street lights for municipal roads and infrastructure projects. The integrated PV, LiFePO₄ battery, controller and luminaire arrangement simplifies installation and reduces external wiring. Compare the HC, AF, TJ and GM series, then match the selected model to local lighting, solar and operating requirements.

Explore HC, AF, TJ & GM Series →

  • Integrated Structure
  • LiFePO₄ System
  • Project-Matched Optics
  • Tender Document Support
Request Model & Project Configuration
Engineering Support
SL-AIO-HC all-in-one solar street light for municipal and EPC projects

Project Inputs for AIO Model Selection

Share the project inputs below so the model, energy configuration and document requirements can be reviewed together. Mark unknown inputs “To be confirmed.”

Location & Solar Resource

Country, city, seasonal solar conditions and shading.

Road Geometry

Road width, pole height, pole spacing and mounting conditions.

Operating Profile

Nightly working hours, dimming schedule and any sensor requirement.

Autonomy

Backup target and the operating assumptions used to define it.

Lighting & Optics

Lighting target, uniformity/glare criteria and required optical distribution.

Required Documents

BOQ, datasheet, IES/LDT, drawings or tender document requirements.
Send AIO Project Inputs

Integrated Design, Installation & Service Access

SL-AIO-HC integrated solar street light system and component views
Product views

Integrated components

PV, battery, controller and luminaire are arranged as one integrated system, reducing exposed components and external wiring.

Installation review

Check the mounting interface, bracket, tilt range, pole structure and local solar orientation before selecting the configuration.

Service access

Confirm how the battery and controller can be accessed and which replacement parts match the supplied version.

Energy and thermal limits

The available PV area, battery space, operating profile and thermal environment must support the project requirement.

All-in-One can simplify external wiring and installation when its integrated PV layout, battery capacity, thermal conditions and service access fit the project. Where independent PV orientation, component placement or maintenance flexibility is needed, review All-in-Two or Split before confirming the architecture.

Compare Solar System Architectures →

Choose the AIO Series for Your Project

Compare the series by project geometry, mounting-height direction, operating profile, autonomy, thermal and service requirements, procurement approach and document needs. Do not choose by wattage alone.
SL-AIO-HC high-configuration all-in-one solar street light

SL-AIO-HC

Engineering & Tender Configuration

A high-configuration AIO platform for projects requiring model-matched energy parameters, technical documentation and configuration review.

  • Model and energy configuration
  • Optics, service and engineering files
View HC Series
All-in-One solar street light for municipal road and public area projects

SL-ONE-AF

Government & EPC Flagship Direction

For municipal and urban road programs, with an extruded-aluminium and thermal-management emphasis, installation efficiency and project-document depth.

  • 6–12 m primary project direction
  • Thermal path and installation review
  • Project-standardized road programs
View AF Series
SL-ONE-TJ all-in-one solar street light for distributor and EPC project orders

SL-ONE-TJ

Standardized Batch Value

A compact, cost-effective direction for branch and community roads, local public roads, distributor programs and repeat procurement.

  • Primarily approximately 8 m or below
  • Standardized procurement and installation
  • Branch and community roads
View TJ Series
SL-ONE-GM all-in-one solar street light for public area lighting projects

SL-ONE-GM

Africa-Oriented Road-Scale Value

Review cost and output together with optics, spacing, mounting interfaces and local road-program requirements.

  • Generally 6–12 m project review
  • Optics, spacing and interface review
  • Local and anti-theft exposure
View GM Series
Height directions are preliminary selection guidance. Final model suitability follows the road geometry, optics, operating profile, autonomy, thermal conditions, mounting interface and confirmed configuration. GM colour-temperature and local-market options are reviewed for the requested project.

SL-AIO-HC Model Range & Project Specifications

The six HC configurations below provide nominal parameters for preliminary selection. Final model suitability depends on the lighting design, operating profile, local solar conditions and the confirmed configuration.

HC Model Range

Reference Luminous Flux: calculated from rated LED power at the nominal reference efficacy of 200 lm/W. It is not a measured photometric or LM-79 result. Final lighting design uses the matched photometric data, confirmed optic and agreed operating profile.

Nominal battery energy is not usable or measured capacity. Lamp-body dimensions exclude the mounting bracket; installed dimensions follow the approved drawing.

All models use a 25.6 V LiFePO₄ battery system.

ModelRated LED PowerPV PowerNominal Battery EnergyReference Luminous Flux¹Lamp-body Dimensions²
SL-AIO-HC-4040 W100 W384 Wh8,000 lm1000 × 500 × 50 mm
SL-AIO-HC-6060 W120 W576 Wh12,000 lm1200 × 500 × 50 mm
SL-AIO-HC-8080 W150 W665 Wh16,000 lm1500 × 500 × 50 mm
SL-AIO-HC-100100 W220 W1,331 Wh20,000 lm1500 × 700 × 50 mm
SL-AIO-HC-120120 W250 W1,715 Wh24,000 lm1500 × 750 × 50 mm
SL-AIO-HC-150150 W300 W2,329 Wh30,000 lm1600 × 850 × 50 mm

SL-AIO-HC-40

Rated LED Power40 W
PV Power100 W
Nominal Battery Energy384 Wh
Reference Luminous Flux¹8,000 lm
Lamp-body Dimensions²1000 × 500 × 50 mm

SL-AIO-HC-60

Rated LED Power60 W
PV Power120 W
Nominal Battery Energy576 Wh
Reference Luminous Flux¹12,000 lm
Lamp-body Dimensions²1200 × 500 × 50 mm

SL-AIO-HC-80

Rated LED Power80 W
PV Power150 W
Nominal Battery Energy665 Wh
Reference Luminous Flux¹16,000 lm
Lamp-body Dimensions²1500 × 500 × 50 mm

SL-AIO-HC-100

Rated LED Power100 W
PV Power220 W
Nominal Battery Energy1,331 Wh
Reference Luminous Flux¹20,000 lm
Lamp-body Dimensions²1500 × 700 × 50 mm

SL-AIO-HC-120

Rated LED Power120 W
PV Power250 W
Nominal Battery Energy1,715 Wh
Reference Luminous Flux¹24,000 lm
Lamp-body Dimensions²1500 × 750 × 50 mm

SL-AIO-HC-150

Rated LED Power150 W
PV Power300 W
Nominal Battery Energy2,329 Wh
Reference Luminous Flux¹30,000 lm
Lamp-body Dimensions²1600 × 850 × 50 mm

1 Reference luminous flux is calculated from the stated LED power at 200 lm/W. It is not a model-specific measured photometric result. Final lighting design uses the matching photometric file and agreed operating profile.

2 Lamp-body dimensions exclude the mounting bracket. Battery energy is nominal; installed dimensions follow the approved drawing.

Shared System Specifications

Technical ItemSpecification
Energy & Control
Battery System25.6 V LiFePO₄
PV ModuleMonofacial or bifacial monocrystalline options.
Charge ControllerMPPT
Lighting ControlDusk-to-dawn operation with programmable dimming.
Remote-Control Options4G, GPS and remote monitoring; LoRa by project.
Lighting & Optics
Standard Nominal Luminaire Efficacy200 lm/W
Third-Party Tested Efficacy ReferencesSunlurio LED modules using applicable 3030, 5050 or 7070 LED packages: up to 230 lm/W. Complete LED luminaires: 200–210 lm/W. Both are based on independent third-party laboratory testing of applicable configurations. These figures refer to different measurement levels and are not universal measured ratings for every HC model.
LED Package Options3030 / 5050 / 5054 / 7070
LED SourceFollows the confirmed configuration.
Correlated Colour Temperature6000 K standard; 3000 / 4000 / 5000 / 6500 K options.
Colour Rendering IndexRa ≥70
Optical DistributionType II / Type III / Type IV options.
Structure / Protection / Service
Ingress ProtectionIP66 standard; IP65 optional.
Impact ProtectionIK08 for the specified enclosure configuration.
HousingAluminium-alloy housing and mounting structure.
Pole InterfaceØ70 / Ø80 / Ø96 mm interface options.
Tilt Adjustment0–30°
Operating Temperature−30°C to +65°C for the specified configuration. Battery charging limits are defined separately.
MaintenanceQuick-access removable battery pack with waterproof quick connector.
Warranty5 years, subject to agreed project and order terms.
Engineering DocumentationModel-matched datasheets, drawings, IES / LDT, DIALux and BOQ support according to project requirements.
Model- and optic-matched files follow the confirmed configuration. When requesting the document path, identify the HC model, PV option, nominal battery energy and optic under review, and note any proposed change to the published configuration. Ask which datasheet revision, IES/LDT file and mounting drawing apply to that combination; availability and applicability require confirmation before tender or installation use.
Review HC Technical Details
Request Model-Matched Datasheet

Model-Matched Files for AIO Project Review

Confirm the AIO model, optic and project inputs before requesting technical files. Documents are released according to the configuration and project stage.

For preliminary specification review, the HC series page provides the public SL-AIO-HC-120/150 Technical Datasheet, Issue 2026.10. It is a reference for those two configurations, not an installation manual or a project-specific photometric report. For IES/LDT files and project calculations, confirm availability and scope for the selected model, optic and project.

Model-Matched Datasheet & Drawing

Confirm the model, dimensions and mounting version before requesting the project datasheet or drawing.
Request Model-Matched Datasheet

IES / LDT

Request model- and optic-matched photometric files after the configuration and BOM are confirmed.
Request IES / LDT

DIALux / Relux

Lighting-layout review follows the road geometry, lighting target and approved model/IES.
Request DIALux Review

BOQ / Tender

Submit the BOQ and project context for preliminary technical-item and document-scope review.
Submit BOQ for Preliminary Review
Configuration records, batch inspection and the approved packing plan support project consistency. Final lead time, packing dimensions and document scope follow the confirmed order.
Manufacturing & Quality

All-in-One Project Evidence

Project records show different AIO supply scopes and installation conditions. Each new project requires its own configuration and document review.
Solar street lights illuminating a rural road for Burkina Faso project review

Burkina Faso — Lens-Type AIO Road Lighting

Lens-type All-in-One lighting supplied for a road project in Burkina Faso, with separate schedules for luminaires, arms, poles and anchors.

2025 · Accepted
80 W LED · 750 luminaires · 750 arms
500 × 7 m poles · 500 anchor-bolt sets

View Burkina Faso Project
Sri Lanka all-in-one solar street lighting project acceptance photo

Sri Lanka — Public-Area AIO Lighting

All-in-One solar lighting supplied for a public-area project in Sri Lanka, with project configuration support and client/EPC installation.

2024 · Completed
300 sets · 60 W LED · 6 m poles

View Sri Lanka Project

AIO Selection Questions

Share the location, road width, pole height and spacing, lighting target, working hours, dimming profile, autonomy target and required documents. Mark unknown inputs “To be confirmed.”
Review the operating profile with local solar conditions, shading and the autonomy target. Nominal PV and battery values are selection inputs; they do not establish the final energy balance on their own.
The HC reference lineup includes 120 W and 150 W LED configurations. Suitability still depends on optics, road geometry, the lighting target, thermal conditions and the project operating profile.
Working hours, dimming, usable battery energy, seasonal solar resource, shading and component operating limits affect the result. Define the assumptions before comparing backup-day claims.
Confirm the supplied mounting drawing, battery access, controller arrangement, replacement parts and component temperature limits. The luminaire operating-temperature statement is not a battery charging-temperature allowance.
Model- and optic-matched IES/LDT files, DIALux support, datasheets, drawings and BOQ review follow the confirmed configuration and project requirements.
Confirm the model, optic, BOM and project inputs first. File availability and release depend on the document stage and applicable approval or confidentiality requirements.
Review another architecture when independent PV orientation, component location, larger energy-storage arrangements or maintenance access cannot be addressed by the proposed AIO configuration. Use the Solar Street Light Overview to compare the system-level options.

Request Model & Project Configuration

Share the AIO model or project requirements you are reviewing. Include the site inputs and document stage so the configuration and technical-file path can be assessed together.
  • Provide the model or road and operating inputs.
  • Review the architecture, energy configuration, optics and document requirements.
  • Confirm the configuration and applicable technical-file path.

PLANNING A SOLAR STREET LIGHTING PROJECT?

Share your project location, estimated quantity and requirements.
We’ll review the suitable configuration and supply scope for your project.

Request a Project Document Pack

Share your project location, road width, pole height, spacing, working hours, backup days, and required documents. Our team can help prepare configuration guidance, datasheets, IES/LDT files, DIALux support when applicable, drawings, and BOQ matching notes.