Products / LED Modules

SUNLURIO / LED MODULES & COMPONENTS

LED Modules

LED modules for mains-powered street lights, solar lighting and retrofits

Select LED modules and components for new mains-powered luminaires, existing installations and spare parts programmes.

Have an old module or a driver label? Start with photos, dimensions and quantity. We check physical fit, driver compatibility and where the light needs to fall.

SL-LM001

AC

Mains street lighting: match the driver, housing and road

For new luminaires, municipal maintenance and spare parts programmes.

Input and driver

Confirm local AC supply and driver input. At the module, match constant current, output voltage window and series or parallel wiring. A mains input rating does not permit connecting a DC module directly to AC.

Road optics

Provide road width, pole height, spacing and lighting targets. Check illuminance or luminance, uniformity and glare with the IES or LDT file for the proposed luminaire.

Protection and retrofit

Check supply range, transient surge and sustained overvoltage separately. For retrofits, also verify earthing, sealing, operating temperature and tender requirements.

MODELS

SL module catalogue

Mains street lighting comes first. Use the figures to shortlist a configuration, then confirm the order specification against the approved drawing and test report.

SL-LM001

Compact square or rectangular families

SL-LM001 module configuration image
SL-LM001 · shared family image; confirm the exact variant before ordering.
ParameterSpecification
LED packages3030 / 5050
Base material6063-T5
Ingress protectionIP66
Dimensions / weightTo be confirmed
CCTTo be confirmed
Power and efficacy30 / 40 W · 150–160 lm/W

Check outline, hole spacing and cable exit for each model.

SL-LM002

Compact square or rectangular families

SL-LM002 module configuration image
SL-LM002 · shared family image; confirm the exact variant before ordering.
ParameterSpecification
LED packages3030 / 5050
Base material6063-T5
Ingress protectionIP66
Dimensions / weightTo be confirmed
CCTTo be confirmed
Power and efficacy60 W · 155–173 lm/W

Check outline, hole spacing and cable exit for each model.

SL-LM003

Compact square or rectangular families

SL-LM003 module configuration image
SL-LM003 · shared family image; confirm the exact variant before ordering.
ParameterSpecification
LED packages3030 / 5050
Base material6063-T5
Ingress protectionIP66
Dimensions / weightTo be confirmed
CCTTo be confirmed
Power and efficacy60 W · 155–173 lm/W

Check outline, hole spacing and cable exit for each model.

SL-LM004

Compact square or rectangular families

SL-LM004 module configuration image
SL-LM004 · shared family image; confirm the exact variant before ordering.
ParameterSpecification
LED packages3030 / 5050
Base material6063-T5
Ingress protectionIP66
Dimensions / weightTo be confirmed
CCTTo be confirmed
Power and efficacy60 W · 155 / 180 lm/W

Check outline, hole spacing and cable exit for each model.

SL-LM005

Compact square or rectangular families

SL-LM005 module configuration image
SL-LM005 · shared family image; confirm the exact variant before ordering.
ParameterSpecification
LED packages3030 / 5050
Base material6063-T5
Ingress protectionIP66
Dimensions / weightTo be confirmed
CCTTo be confirmed
Power and efficacy60 W · 155 / 180 lm/W

Check outline, hole spacing and cable exit for each model.

SL-LM006

Rectangular

SL-LM006 module configuration image
SL-LM006 · shared family image; confirm the exact variant before ordering.
ParameterSpecification
LED packages3030 / 5050
Base materialADC12
Ingress protectionIP66
Dimensions / weightTo be confirmed
CCT3000 / 4000 / 5000 / 5700 K
Power and efficacy50 / 60 W

Check optic orientation and mounting shoulder.

SL-LM007

Glass-front rectangular

SL-LM007 module configuration image
SL-LM007 · shared family image; confirm the exact variant before ordering.
ParameterSpecification
LED packages3030 / 5050
Base material6063-T5
Ingress protectionIP66
Dimensions / weightTo be confirmed
CCTTo be confirmed
Power and efficacyTo be confirmed

Confirm glass, gasket and spare parts scope.

SL-LM008

Long rectangular

Product photograph pending. Ask for the confirmed photograph and mounting drawing for SL-LM008.

ParameterSpecification
LED packages2835 / 3030 / 5050
Base materialADC12
Ingress protectionIP66
Dimensions / weight300 × 70 × 35.1 mm / 480 g
CCTTo be confirmed
Power and efficacy50 / 60 W · 140–175 lm/W

Reference envelope: 300 × 70 × 35.1 mm; confirm against drawing.

SL-LM009

High-output rectangular families

SL-LM009 module configuration image
SL-LM009 · shared family image; confirm the exact variant before ordering.
ParameterSpecification
LED packages5050
Base material6063-T5
Ingress protectionIP66
Dimensions / weightTo be confirmed
CCTTo be confirmed
Power and efficacy50–80 W · 173–185 lm/W

Check driver, current and thermal clearance first.

SL-LM010

High-output rectangular families

SL-LM010 module configuration image
SL-LM010 · shared family image; confirm the exact variant before ordering.
ParameterSpecification
LED packages5050
Base material6063-T5
Ingress protectionIP66
Dimensions / weightTo be confirmed
CCTTo be confirmed
Power and efficacy50–80 W · 173–185 lm/W

Check driver, current and thermal clearance first.

SL-LM011

Glass-front, near square

SL-LM011 module configuration image
SL-LM011 · shared family image; confirm the exact variant before ordering.
ParameterSpecification
LED packages3030 / 5050
Base materialADC12
Ingress protectionIP66
Dimensions / weight201 × 180 × 48 mm / 580 g
CCT3000 / 4000 / 5000 / 5700 K
Power and efficacy50–80 W · 150–180 lm/W

Reference footprint: 201 × 180 mm; verify mounting holes.

SL-LM012

Round white-light module

SL-LM012 module configuration image
SL-LM012 · shared family image; confirm the exact variant before ordering.
ParameterSpecification
LED packages3030
Base materialADC12
Ingress protectionIP65
Dimensions / weightØ75–120 mm
CCT2700 K
Power and efficacyTo be confirmed

Reference diameter range: 75–120 mm; confirm variant and optics.

SL-LM013

Round RGBW landscape module

ParameterSpecification
LED packages3030 / RGBW
Base materialADC12
Ingress protectionIP65
Dimensions / weightTo be confirmed
CCT2700–5700 K + RGB
Power and efficacyTo be confirmed

Confirm channels, controls and optics separately for landscape projects.

SL-LM014

Tunable white

SL-LM014 module configuration image
SL-LM014 · shared family image; confirm the exact variant before ordering.
ParameterSpecification
LED packages3030
Base material6063-T5
Ingress protectionIP66
Dimensions / weightTo be confirmed
CCT3000–5700 K
Power and efficacy60 W

Confirm channels, CCT range and mechanical drawing.

SL-LM015

Die-cast family

ParameterSpecification
LED packages2835 / 3030 / 5050
Base materialADC12
Ingress protectionIP66
Dimensions / weightTo be confirmed
CCTTo be confirmed
Power and efficacy40–60 W · 140–182 lm/W

Confirm outline, thermal interface and fasteners.

SL-LM016

Die-cast family

ParameterSpecification
LED packages2835 / 3030 / 5050
Base materialADC12
Ingress protectionIP66
Dimensions / weightTo be confirmed
CCTTo be confirmed
Power and efficacy40–60 W · 140–182 lm/W

Confirm outline, thermal interface and fasteners.

SL-LM017

Die-cast family

Product photograph pending. Ask for the confirmed photograph and mounting drawing for SL-LM017.

ParameterSpecification
LED packages2835 / 3030 / 5050
Base materialADC12
Ingress protectionIP66
Dimensions / weightTo be confirmed
CCT3000 / 4000 / 5000 / 5700 K
Power and efficacy40–60 W · 140–175 lm/W

Confirm outline, optical variant and sealing design.

SL-LM018

Die-cast family

Product photograph pending. Ask for the confirmed photograph and mounting drawing for SL-LM018.

ParameterSpecification
LED packages2835 / 3030 / 5050
Base materialADC12
Ingress protectionIP66
Dimensions / weightTo be confirmed
CCT3000 / 4000 / 5000 / 5700 K
Power and efficacy40–60 W · 140–175 lm/W

Confirm outline, optical variant and sealing design.

SL-LM027

White LED board

4000 K · CRI 70 · 1015 lm · 203 lm/W · IP20 · 70.6 × 49.5 × 1.6 mm · 16 g

SL-LM019

Short dual-channel board

SL-LM019 module configuration image
Product image
SL-LM019 module configuration image
Dimension drawing (mm)
SL-LM019 module configuration image
Board light distribution (not luminaire photometry)

2200 / 4000 K · 49.5 × 121.4 mm · 120° · IP00 · 350 mA rated / 900 mA max · Ta −40…80 °C · Tc ≤95 °C · 3 SDCM

SL-LM020

Long dual-channel board

SL-LM020 module configuration image
Product image
SL-LM020 module configuration image
Dimension drawing (mm)
SL-LM020 module configuration image
Board light distribution (not luminaire photometry)

2200 / 4000 K · 49.5 × 223 mm · 120° · IP00 · 350 mA rated / 900 mA max · Ta −40…80 °C · Tc ≤95 °C · 3 SDCM

SL-LM021

LED board with NTC

SL-LM021 module configuration image
SL-LM021 · shared family image; confirm the exact variant before ordering.

2200 / 2700 / 3000 / 4000 / 5700 / 6500 K · IP20 · ≤5 SDCM
2×2 / 2×4 / 2×6 / 2×8 · 530 mA · 12 / 23 / 34 / 45 V · 6 / 12 / 18 / 24 W · 1110 / 2220 / 3330 / 4450 lm

SL-LM022

5050 LED board family

8 / 12 / 16 / 24 LEDs · ≤3 SDCM · MCPCB

SL-LM023

Sealed rectangular module

40 / 50 / 60 W · 7600 / 9250 / 10800 lm · 50–64 VDC · 700 / 850 / 1000 mA · IP68 · 275 × 75 × 48 mm · 520 g

SL-LM024

30 W narrow rectangular module

30 W · 110–160 lm/W · 42–52 V · CRI 70 · 55 × 150° / 80 × 150° · 300 × 70 × 40 mm

SL-LM025

40 W narrow rectangular module

40 W · 100–150 lm/W

SL-LM026

50 W narrow rectangular module

50 W · 100–140 lm/W

01 / YOUR TASK

Start with the job you need to complete

Buying an LED board, replacing a complete light engine and developing a new street light are different tasks. Choose the situation closest to yours. This makes the next technical conversation more useful and avoids asking you for information that does not affect your decision.

Replace a failed part

Prepare the original luminaire and component labels, front and rear photographs, overall dimensions and mounting hole positions. A light that does not work may have a driver, connector or control problem. Diagnose the fault before ordering a replacement LED board.

Develop a new luminaire

Start with the lighting task, available housing space and cooling arrangement. Define a combination of LED board, optics, driver and mounting parts. Verify the proposed assembly with a sample before fixing the production configuration. This is especially important when changing more than one component.

Purchase project spare parts

Connect each spare part to a luminaire model, revision and installed quantity. List modules, drivers, surge protectors and seals separately. A box labelled accessories is not useful if the maintenance team cannot identify which light each item belongs to.

02 / MODULE STRUCTURES

Different module structures need different decisions

Start with the structure, then confirm the available model and configuration. These categories involve different cooling, protection and installation responsibilities. Use the distinctions below to describe what you need rather than guessing a model number. The actual component combination and supply conditions are established for the selected product.

Board-level LED modules

A starting point for luminaires with a defined housing and cooling structure. The board carries the LEDs and connections; it is not a finished weatherproof light engine on its own.

Check current and voltage, board dimensions, LED spacing, compatible optics and the thermal contact surface.

Modules with integrated cooling and protection

A possible route for modular luminaires or verified complete-unit replacement. Consider the light source, optics, cooling and sealing as one assembly, while still checking how it fits the host luminaire.

Check overall dimensions, fixing points, connectors, sealing details, protection evidence and access for maintenance.

Tunable-white and application-specific combinations

For projects with a defined light colour or distribution requirement. A dual-channel board or a pedestrian-crossing optic should not be treated as a direct substitute for a standard white road-lighting module.

Check channel limits, control method, mixed output, photometric data and the installation orientation.

03 / COMPONENTS MATTER

Include the parts that make the module work

You can describe a requirement for an individual component, a matched combination or a project spare-parts package. Separate supply, minimum order quantities, availability and lead times must be confirmed. The quotation should make clear which parts are already included in the module assembly.

ComponentWhat it doesConfirm before selection
SL-PA01 · LED boards and light-source assembliesConvert electrical energy into light.Exact LED part number, quantity, circuit arrangement, current, voltage range, board thickness and fixing points.
SL-PA02 · Lenses and optical assemblies
SL-PA02 Product image
Product image
Direct light towards the road or target area. 50 × 50 mm array for flat 5050 LEDs. Verify LED position and optical distribution.LED compatibility, distribution file, material, orientation and fastening. A similar footprint does not establish optical compatibility.
SL-PA03 · Heat sinks and thermal interface materialsMove heat away from the LED assembly.Contact area, interface thickness, fastening method and temperature rise in the intended housing.
SL-PA04 · Glass, gaskets and protective partsProtect the assembly and restore the intended seal.Material, dimensions, compression, weathering behaviour, replacement method and protection after reassembly.
SL-PA05 · Constant-current LED driversSupply the current the LED circuit needs.Output voltage window, current setting, AC or DC input, isolation and dimming interface.
SL-PA06 · Surge protective devicesLimit surge exposure within their specified conditions.System voltage, protection modes, earthing arrangement, failure indication, dimensions and tested assembly.
SL-PA07 · Wiring harnesses, connectors and terminalsConnect the module, driver and control parts.Polarity, current rating, cable diameter, sealing interface, locking method and cable length.
SL-PA08 · Brackets, retaining plates and fastenersKeep the assembly in the correct position.Hole spacing, material, corrosion protection, torque, locking, loads and the housing connection.
SL-PA09 · Control receptacles and shorting capsProvide connections for a specified control arrangement.Exact NEMA or Zhaga interface, pin assignment, driver protocol, sealing and system compatibility.
SL-PA10 · Maintenance and project spare kitsOrganise replaceable items around the installed products.Part numbers, supported revisions, quantities, labels, storage conditions and approved substitution rules.

OPTIONS

LED chip, package and driver options

Specify a preferred brand or ask us to match components to the operating conditions.

LED light sources: specify the package or the die

In purchasing, “LED chip” often means the packaged LED. The die is the light-emitting semiconductor inside the package. You can specify either or both; a brand or a package size alone does not identify a part.

OptionsWhat to confirm
LED die brands: Sanan Optoelectronics, HC SemiTek, Zhaochi Semiconductor, ChangelightFor die-origin requirements, confirm the die part number, packaging supplier and lot traceability. Accept the configuration against the packaged LED specification and module test data.
Packaged LED brands: Hongli Zhihui, Refond, NationStar, APT Electronics, Tiandian OptoelectronicsCommon package sizes: 2835, 3030 and 5050. Confirm the full part number, operating current, forward voltage, CCT, CRI, colour tolerance, optic alignment and thermal conditions.

Mains street lights: constant-current LED drivers

Match the driver to the module first, then select dimming and control features. Drivers with the same wattage can have different output currents and voltage windows.

OptionsWhat to confirm
Mainland Chinese options seen in projects: Inventronics, MOSO, Lifud, SOSEN and EagleriseConfirm the outdoor series, local AC input range, constant-current output and voltage window, dimming protocol, ingress protection, surge test conditions and required approvals.
Another option commonly sourced in China: MEAN WELL (Taiwan brand)Compare at the same operating point. For 0–10 V, DALI or programmable dimming, verify the exact series and suffix.

Solar street lights: DC LED drive and charge control

Use a solar controller with constant-current LED output, or pair a charge controller with a separate DC constant-current driver.

OptionsWhat to confirm
Solar control options: SRNE and EPEVERVerify whether the exact series provides constant-current output. Match battery chemistry and voltage, PV input, night dimming and low-voltage protection. A standard charge controller load output should not be assumed suitable for a bare LED module.

Brands are available for quotation review. Confirm compatible parts, lead times and approvals in the written quotation for the selected SL configuration.

04 / COMPARABLE SPECIFICATIONS

Read each specification as an answer to a practical question

The same number can mean different things under different test conditions. Use the fields below to request a model-specific specification at your intended colour temperature, current and assembly. Agree which values are nominal, which are minimum guarantees, and which conditions apply before comparing alternative products.

ParameterThe practical questionWhat to agree
Actual power, WIs this LED power, module-terminal power or complete-luminaire input?State each relevant boundary at the intended current, temperature and driver configuration.
Flux, lm, and efficacy, lm/WHow much light is produced, and for how much electrical input?Identify lenses, glass and driver losses included in the measurement; state thermal stabilisation conditions.
Current, mA, and forward voltage, VCan the driver operate the assembly correctly when cold and hot?Provide rated and maximum current, together with the operating voltage limits. A nominal voltage alone is insufficient.
CCT, CRI and SDCMWhat colour is the light, and how consistent will batches appear?Confirm the selected colour temperature, colour rendering and colour tolerance, rather than using another variant’s peak efficacy.
Distribution and IES/LDTWill the light reach the intended surface?Match the file to the LED, optic, power and orientation used in the proposed assembly.
Ambient and case temperatureHow hot is the environment and the defined measurement point?Distinguish ambient temperature from component temperatures and state mounting and derating conditions.
IP, IK and corrosion protectionWhat environmental and mechanical conditions are covered?Identify the tested object and assembly. An ingress rating does not replace corrosion evidence.
Lifetime and warrantyHow is output maintained, and who covers a failure?State lifetime conditions and failure definitions; list warranty duration, start date and responsibilities separately.

OPTICS

Put light where it is needed

The same LED assembly can behave very differently with another lens. Roads, parking areas, pedestrian crossings and gardens need different distributions. Share road width, mounting height, pole spacing, arrangement and the required lighting criteria before choosing an optical combination.

An IES or LDT file describes how light is distributed. A DIALux calculation places that distribution into a road or site model to assess the required average level, uniformity, glare and spill light. A curve image or a lumen figure alone does not show that the installation will comply. Photometric data must remain traceable to its tested configuration; it should not be edited simply to produce a more favourable calculation. If the source output or optics change, check whether the file still represents the proposed product.

THERMAL DESIGN

Check the heat path before increasing power

LED packages, board construction, interface material, fixing pressure and the heat sink work together. Aluminium grade or heat-sink weight alone cannot establish operating temperature or life. Replacing a thermal pad with a different thickness can change contact and performance.

For hot, humid or coastal locations, describe the actual environment and the required protection. A higher ingress rating does not automatically solve condensation, corrosion or overheating. Validate the proposed module in its intended housing. A board measurement under laboratory conditions is not a promise of complete-luminaire performance at a high outdoor ambient temperature. Ask for measurement-point definitions, mounting conditions and applicable derating information before relying on a lifetime claim.

05 / REPLACEMENT & SERVICE

Replacement: physical fit is only part of compatibility

Similar appearance, fixing holes and rated watts do not establish electrical, thermal or optical compatibility. Identify the original configuration and fault first. The right action may be replacing a board, a complete module, a driver or the luminaire rather than changing every component.

No model number? Start with five things

  • The complete luminaire and its rating label
  • Front, rear and label photographs of the module
  • The driver label and connectors
  • Overall dimensions, fixing holes and available space
  • Quantity, destination and a description of the fault

06 / SOLAR SYSTEM MATCHING

For solar street lights, check the energy balance again

A more efficient light source may improve energy use, but changing the module does not by itself guarantee all-night operation. Actual LED load, driver and control consumption, hourly dimming, usable battery energy and charging in the least favourable month need to be considered together.

Battery voltage is not necessarily the LED operating voltage. After a module change, check controller output limits, maximum current, low-battery operation and temperature protection. Road spacing, mounting height and optics still determine whether the light is useful on the surface. An energy-saving percentage is not a substitute for a lighting calculation. Where the existing system cannot be identified, collect the controller, battery and module information before proposing a replacement that could change its operating behaviour.

07 / CONFIGURATION-SPECIFIC DOCUMENTS

Request documents for the configuration you are buying

Tell us whether the documents are for initial selection, sample evaluation, consultant review or a tender. Agree which files can be supplied, their revision, responsible party and delivery date. We help you match the available documents to your selected components and identify any additional testing needed for your project.

StageDocuments to agreePurpose
Selection and quotationConfiguration sheet, itemised bill of materials, inclusions, exclusions, interface dimensions, quantity and trade terms.Make competing proposals comparable within the same supply boundary.
Lighting designConfiguration-specific IES/LDT, site inputs and calculation assumptions; DIALux assessment where required and agreed.Show which optics and site were assessed; a simulation is not site acceptance.
Sample and technical reviewDrawings, datasheets, applicable report and certificate register, revisions and deviations.Check that evidence covers the proposed LEDs, driver, construction and power.
Installation and serviceExploded drawing, part references, instructions, permitted replacement personnel and sealing-restoration requirements.Help the maintenance team identify, replace and verify the correct component.

08 / SUPPLY & SPARES

Define the supply boundary before comparing prices

One quotation for an LED module may include only a populated board. Another may include optics, a heat sink, leads or a driver. Confirm the bill of materials before comparing totals. Samples, minimum quantities, production timing, packaging and warranty depend on the selected configuration and order; they should not be assumed to apply across every product.

Set spare quantities using the installed model mix, critical parts, maintenance capability and contract requirements. A percentage used on a previous project is not a universal rule. Discuss substitutes, discontinuation notices, free-of-charge coverage, freight and site labour separately. Give each spare a useful label so that a local technician can trace it to the correct luminaire revision. For a tender, distinguish mandatory requirements, proposed alternatives and unresolved points instead of describing an unverified offer as fully compliant.

09 / FAQ

Questions worth resolving before an order

Can I request only a lens, driver or gasket?

Yes, you can start with an individual-component request. The exact part reference, original revision, dimensions, electrical interface and material need to be checked before separate supply conditions are confirmed. Send a photo or part number and your required quantity. We will check the matching component and confirm availability for your order.

Will any 50 W module replace another 50 W module?

Power alone is not a replacement specification. Two assemblies can use different currents, voltage ranges, circuits and cooling conditions at the same wattage. Even if the replacement lights up, temperature, distribution and driver operating limits still need to be checked. Operation is not the same as verified compatibility.

Is 5050 better than 3030?

These names mainly describe package size, not a quality grade. Compare the exact LED part number, operating current, output, optics, thermal path and cost. Keep colour temperature, colour rendering and thermal conditions consistent when evaluating alternatives. A package label by itself cannot identify the most suitable design.

Can a very high efficacy figure be guaranteed?

First establish whether the figure refers to the LED package, module or complete luminaire. Then define colour temperature, colour rendering, current, optics and temperature. Any guarantee needs to be tied to the selected configuration and applicable evidence. We help you compare options at the same current, colour temperature and thermal conditions, so the efficiency figure is useful for your design.

Can an IP20 board be used in an outdoor light?

It can be an internal component of an appropriately designed luminaire, provided the housing supplies suitable protection and the electrical and thermal design is correct. The board itself should not be exposed to rain. Verify protection on the finished assembly, including its joints, wiring and installation conditions.

Can I increase power to make an old light brighter?

Check ageing, dirt, the driver and optics first. Increasing power may raise temperature and glare or exceed the driver capability without improving useful road coverage. Assess the complete combination against the lighting task before changing the load. This avoids creating a second problem during a repair.

Does a Zhaga or NEMA receptacle provide smart control?

A receptacle is one part of a system. Confirm the specific connector, pins, power supply, driver dimming interface, control node, network and platform. List receptacles, shorting caps and controllers separately. A mechanical interface does not establish communications compatibility or include a software service.

Can I obtain certificates and tender documents?

Provide the required standards, document format, proposed model and deadline. The next step is to establish which existing documents apply, what must be added and whether there are deviations. A certificate, a full test report and a manufacturer declaration serve different purposes and should not be substituted without agreement.

Is module lifetime the same as luminaire warranty?

No. Lifetime describes output maintenance or failures under defined operating conditions. Warranty defines a period, start date, covered parts and remedies. Check the LEDs, driver and sealing conditions separately, and use the terms agreed for the order. A lifetime figure is not a promise of free replacement for that number of years.

Do I need a complete specification before contacting you?

No. Start with whether you are developing a new light or replacing an existing part, what you need, quantity and destination. Photographs or existing files can follow. The useful next step is identifying the missing information that affects selection, rather than asking you to fill in every possible technical field.

Catalogue and technical datasheet

English selection edition · 18 November 2026. Includes the 27 SL module references and accessory groups. Use these files to shortlist components, then send us your SL reference and project requirements for a matched configuration and quotation.

Send your SL model or project requirement

For a new mains-powered luminaire, see LED Street Lights. For optical calculations, see IES / LDT support. For production verification, see manufacturing and quality.

Send the SL model, quantity, destination and any available photos or driver labels. We will identify the missing details for selection.

PLANNING A SOLAR STREET LIGHTING PROJECT?

Share your project location, estimated quantity and requirements.
We’ll review the suitable configuration and supply scope for your project.