REQUEST DOCUMENT PACK

Street Light Project in Côte d’Ivoire (Road & Highway)

Public Côte d’Ivoire street lighting reference for project review.
IES / LDT, layout outputs and BOQ review notes may be reviewed or requested after project scope and product configuration are confirmed. 

Request Similar Project Review
Request Document Scope Review
Country / Region 🇨🇮 Côte d’Ivoire / West Africa
Road Type Road & Highway Sections
Client Type EPC / Contractor
System Type AC LED Street Lighting
Quantity 260 Sets
Pole Height 8m Poles
Lamp Power 80W LED
Optics Road-lighting optics selected according to road width and layout
Input Power 220–240VAC / 50Hz
Engineering Support IES/LDT Review / Layout Outputs / BOQ Alignment Support
Note: This is a separate 260-set AC LED street lighting project and is not part of the 890-set split solar street lighting project. Detailed section layouts and project documents may be reviewed under NDA where disclosure permits.

Project Background

This Côte d’Ivoire road and highway project included 260 sets of AC LED street lights for EPC and contractor delivery requirements.
Confirmed Technical Configuration
  • ✓ Project quantity: 260 AC LED street light sets
  • ✓ Lamp power: 80W LED
  • ✓ Pole height: 8m poles, with project-specific spacing reviewed according to the road layout
  • ✓ Roadway optics: Road-lighting optics selected according to road width, pole arrangement, and section-specific layout requirements
  • ✓ Input power: 220–240VAC / 50Hz
  • ✓ Controls: Dusk-to-dawn AC operation without scheduled dimming or a smart CMS
  • ✓ Protection: IP66 / IK08 luminaire protection, with surge protection specified according to the confirmed tender requirements
  • ✓ Engineering deliverables: IES/LDT review, layout outputs, and BOQ alignment support for the confirmed project scope

Scope & Assumptions

A concise summary of what this reference covers and the verification inputs behind it.
Scope (Côte d’Ivoire Road & Highway)
  • Coverage: road and highway sections (multi-section reference)
  • Use case: EPC / tender workflow requiring auditable assumptions
  • Deliverables referenced: IES/LDT + layout outputs + BOQ mapping notes
  • Configuration approach: section-based range by road width and spacing constraints
Confirmed Verification Inputs
  • Pole height: 8m poles
  • Lamp power: 80W LED
  • Spacing: Project-specific spacing reviewed according to each road section and layout
  • Roadway optics: Selected according to road width, pole arrangement, and required coverage
  • Verification basis: IES/LDT photometric data and section-specific layout outputs
  • Lighting criteria: Lux and uniformity reviewed against the confirmed project brief
  • Controls: Dusk-to-dawn AC operation without scheduled dimming or a smart CMS
Project-specific drawings, calculations, customer details, and commercial documents may be reviewed under NDA where disclosure permits.
Request Verification Inputs →

Installation & Acceptance Checks

These field photos document the installation and commissioning of the 260-set AC LED street lighting project in Côte d’Ivoire. The records below summarize the installation and acceptance checks completed for the project.
Daytime road installation site with paired street lights
Recorded Installation & Acceptance Checks
✓
Bracket / Arm Interface
Verified against the approved drawings, including spigot size, arm length, and luminaire orientation.
✓
Wiring, Sealing & Polarity
Wiring connections and polarity were checked, with cable glands sealed and drip loops confirmed before energizing.
✓
Luminaire Orientation & Roadway Optics
Luminaire tilt and roadway-optics orientation were checked against the approved lighting layout.
✓
Pole Verticality & Base
Pole verticality, base-plate alignment, anchor fasteners, and foundation interfaces were checked after installation.
✓
Surge Protection & Grounding
Surge protection installation and grounding continuity were verified according to the confirmed project requirements.
✓
Power-On & Functional Check
Initial energizing, functional operation, and lighting output were checked and recorded during commissioning.
Detailed inspection, commissioning, and acceptance records are retained as part of the project documentation package.

Document Support Scope

Document support depends on confirmed project scope, product configuration, tender requirements and document stage. Browse public resource pages or request a project-specific review.
Document support path for solar street lighting project review

IES / LDT Photometric Files

Browse IES files used for roadway optics verification and layout checks. Suitable for EPC submissions and audit trails.

View IES Library →
BOQ and checklist support for solar street lighting project review

BOQ (Bill of Quantities)

Review BOQ examples aligned to scope, accessories, and configuration ranges for procurement and budgeting.

View BOQ References →
Lighting report and document review icon for engineering support

Drawings & Acceptance Checklist

Request drawing and datasheet review after product configuration and document stage are confirmed.

View Datasheets & Drawings →
Engineering document review support for solar street lighting project

DIALux / Relux Outputs

See report samples and typical verification items (maintained lux, uniformity, assumptions, and result tables).

View Report Samples →

FAQ (Tender & Verification)

Quick answers to common EPC / tender questions for this reference.
Is this project AC (grid-powered) street lighting or solar?
This reference is for AC LED street lighting (grid-powered). The package focuses on auditable assumptions and tender-ready documentation for EPC review.
What documents can you provide for tender submission?
A tender-style redacted pack can include IES/LDT photometry, layout verification outputs, and BOQ matching notes. Full deliverables and traceability notes can be shared under NDA if required.
Do you provide IES/LDT files and layout outputs for verification?
Yes. This reference is built around documented assumptions (8m poles, spacing per section, optics by road width) and verification-ready outputs for consultant review.
How do you handle road vs highway sections with different widths?
We document section-based assumptions and select roadway optics (Type II / Type III / Type IV) by road width and layout. Spacing and targets are recorded per section and supported by IES + layout outputs.
Does this reference include smart control or dimming profiles?
No. This project reference is configured for dusk-to-dawn operation without scheduled dimming or smart CMS. If your tender requires dimming or monitoring, we can provide an optional configuration range and documentation.
What inputs are needed for a similar project review?
Share road type, targets (maintained lux / uniformity), pole height, layout constraints (spacing/arrangement), and your submission checklist. If available, attach a site sketch or CAD for faster alignment.

Related References

Sunlurio project reference path

More Projects→

Engineering support document path

LED Street Lighting Projects →

Project contact and RFQ path

Engineering Support →

Get in Touch with Sunlurio Manufacturer

Send Your Project Information for Review

Response time depends on project information completeness, BOQ / drawing availability and required document scope.

  • Linrui Business Plaza, Huangdao District, Qingdao,China
  • 0532-83978013
  • 0532-83978023
  • 0086-18653218098
  • info@sunlurio.com
  • Mon - Fri: 9:00am - 6:00pm
Facebook Linkedin

Request a Project Document Pack

Share your project location, road width, pole height, spacing, working hours, backup days, and required documents. Our team can help prepare configuration guidance, datasheets, IES/LDT files, DIALux support when applicable, drawings, and BOQ matching notes.