REQUEST DOCUMENT PACK

Street Lighting Products for EPC, Municipal, and Infrastructure Projects

Select solar, grid, smart, high mast, flood light, and pole solutions by project conditions, installation method, control requirement, and tender document needs.
Solar Street Light SystemsGrid & Smart Street LightingHigh Mast & Flood LightingLighting Poles & Structural Parts
Request Project Configuration
Upload BOQ / Drawings
View Product Selection Matrix →

Project Selection Inputs

Prepare these inputs before quotation.
01 Project country / city02 Road width or area size03 Pole height and spacing04 Working hours and backup days05 Required documents
IES / LDTDIALuxBOQDrawings
PROJECT SELECTION INPUTS

Project Selection & Quotation Inputs

Before quotation, buyers should confirm site conditions, product path, project documents, and tender review needs.This helps avoid wrong wattage selection, battery undersizing, optical mismatch, and document mismatch.

Buyer Inputs

Project country, city, road width, area size, pole height, spacing, operating hours, backup-day target, and control mode.

Site & System Conditions

Power source, installation method, environment exposure, maintenance access, pole condition, climate, and anti-theft risk.

Tender Risk Checks

Check whether the selected product path can match datasheet, IES/LDT, DIALux, BOQ, drawings, packing list, and acceptance requirements.

Engineering Files

Datasheets, IES/LDT, DIALux/Relux, drawings, BOQ notes, and document-pack support.

Manufacturing Review

Factory process, inspection workflow, component matching, packing, and batch delivery review.

Compliance Boundary

Certificates and test reports should match the selected product model and tender requirement instead of being assumed globally.

Request Project Configuration
Upload BOQ / Drawings

Product Overview & Selection

A project-grade selection entry for EPC, municipal, and infrastructure lighting buyers. Start from power source, installation method, control requirements, pole structure, application area, and tender-document needs.

Power sourceInstallation methodControl requirementTender document needs

Start with Project Conditions

Compare Product Paths
Request Project Configuration
Upload BOQ / Drawings

01 / Solar Street Light Systems

Off-grid road and public lighting projects. Choose All-in-One, All-in-Two, or Split by installation method, PV and battery layout, maintenance access, pole structure, and document needs.
Includes: All-in-One, All-in-Two, Split Solar
Review Solar Paths

02 / Grid & Smart Road Lighting

Use LED Street Lights for AC-grid roads and retrofit work. Add Smart Street Light when remote dimming, fault alarms, platform reporting, or maintenance workflow is required.
Includes: LED Street Light, Smart Street Light
Review Grid & Smart

03 / Large Area & Infrastructure

Use High Mast Lighting and LED Flood Light for ports, airports, logistics yards, industrial areas, parking areas, sports courts, and other area-lighting projects.
Includes: High Mast, LED Flood Light
Review Area Lighting

04 / Poles & Structural Support

Use Lighting Poles when the project needs pole height, arm type, flange, anchor bolt, foundation, wind speed, galvanizing, and drawing support.
Includes: Lighting Poles, arms, anchor bolts
Review Pole Systems

Choose by Product Path

Start from project application, power source, control requirements, mounting structure, and document needs. Each path links to the relevant product page for deeper technical review.
All-in-One solar street light for municipal road and public area projects
All-in-One Solar Street Light
Review Product: All-in-One
SL-PRO-JG all-in-two solar street light model for public road lighting
All-in-Two Solar Street Lights
Review Product: All-in-Two
Single-arm solar street light with square panel
Split Solar Street Light
Review Product: Split System
Solar flood light with separate solar panel
LED Flood Light
Review Product: Flood Light
Double-arm LED street light pole for road and boulevard lighting projects
LED Street Light
Review Product: LED Street Light
Smart street lighting system with solar panel
Smart Street Light
Review Product: Smart Lighting
Galvanized lighting pole product
Lighting Poles
Review Product: Lighting Poles
High mast light with round floodlight array
High Mast Lighting
Review Product: High Mast

Quick Product Selection Matrix

Product PathBest ForKey Selection LogicEngineering DocumentsAction
All-in-One Solar Street LightMunicipal and village roads, parks, estate roads, compact off-grid rolloutsIntegrated layout with fewer exposed parts; 100W+ project-specific configurations can be reviewed by site and autonomy.Datasheet IES/LDT DIALux support BOQ notes Review Product
All-in-Two Solar Street LightRoad projects needing more PV orientation flexibility with simpler installation than split systemsSeparate panel and luminaire path; review pole loading, panel direction, backup days, and maintenance access.Datasheet IES/LDT drawings BOQ notes Review Product
Split Solar Street LightProjects needing separated component layout, battery box access, and more civil coordinationReview battery box position, cable route, foundation, pole structure, target lux, and autonomy days.Datasheet IES/LDT DIALux drawings Review Product
LED Street LightsAC-grid roads, retrofit works, industrial roads, and municipal replacement projectsCheck voltage, pole height, spacing, optics, driver, SPD, dimming, and maintenance expectations.Datasheet IES/LDT DIALux/Relux Review Product
Smart Street LightSmart city, remote monitoring, dimming, fault alarm, and platform reporting projectsConfirm network condition, control protocol, cabinet or node plan, and operation responsibility.Datasheet control notes IES/LDT Review Product
High Mast LightingPorts, airports, logistics yards, stadiums, and large public areasCheck mast height, wind load, foundation, target lux, maintenance safety, and lowering system needs.Datasheet drawings DIALux/Relux Review Product
Lighting PolesRoad poles, solar poles, high mast poles, anchor bolts, foundations, and structural supportReview height, arm type, flange, anchor bolt, foundation, wind speed, galvanizing, and drawing support.Pole drawing flange anchor bolts finish notes Review Product
LED Flood LightArea lighting, parking lots, yards, sports courts, industrial sites, and facade lightingReview beam angle, mounting height, bracket, glare control, driver, SPD, and target lux.Datasheet photometry mounting notes Review Product

All-in-One Solar Street Light

Best For:

Municipal and village roads, parks, estate roads, compact off-grid rollouts

Key Selection Logic:

Integrated layout with fewer exposed parts; 100W+ project-specific configurations can be reviewed by site and autonomy.

Engineering Documents:
Datasheet IES/LDT DIALux support BOQ notes
Review Product

All-in-Two Solar Street Light

Best For:

Road projects needing more PV orientation flexibility with simpler installation than split systems

Key Selection Logic:

Separate panel and luminaire path; review pole loading, panel direction, backup days, and maintenance access.

Engineering Documents:
Datasheet IES/LDT drawings BOQ notes
Review Product

Split Solar Street Light

Best For:

Projects needing separated component layout, battery box access, and more civil coordination

Key Selection Logic:

Review battery box position, cable route, foundation, pole structure, target lux, and autonomy days.

Engineering Documents:
Datasheet IES/LDT DIALux drawings
Review Product

LED Street Lights

Best For:

AC-grid roads, retrofit works, industrial roads, and municipal replacement projects

Key Selection Logic:

Check voltage, pole height, spacing, optics, driver, SPD, dimming, and maintenance expectations.

Engineering Documents:
Datasheet IES/LDT DIALux/Relux
Review Product

Smart Street Light

Best For:

Smart city, remote monitoring, dimming, fault alarm, and platform reporting projects

Key Selection Logic:

Confirm network condition, control protocol, cabinet or node plan, and operation responsibility.

Engineering Documents:
Datasheet control notes IES/LDT
Review Product

High Mast Lighting

Best For:

Ports, airports, logistics yards, stadiums, and large public areas

Key Selection Logic:

Check mast height, wind load, foundation, target lux, maintenance safety, and lowering system needs.

Engineering Documents:
Datasheet drawings DIALux/Relux
Review Product

Lighting Poles

Best For:

Road poles, solar poles, high mast poles, anchor bolts, foundations, and structural support

Key Selection Logic:

Review height, arm type, flange, anchor bolt, foundation, wind speed, galvanizing, and drawing support.

Engineering Documents:
Pole drawing flange anchor bolts finish notes
Review Product

LED Flood Light

Best For:

Area lighting, parking lots, yards, sports courts, industrial sites, and facade lighting

Key Selection Logic:

Review beam angle, mounting height, bracket, glare control, driver, SPD, and target lux.

Engineering Documents:
Datasheet photometry mounting notes
Review Product
Quick Answer: For project lighting selection, wattage alone is not enough. The right product path depends on power source, road width or area size, pole height, spacing, working hours, backup days, control requirement, installation method, maintenance access, pole structure, and required tender documents.

Engineering Selection Principle

Engineering Selection Principle

Do Not Choose Street Lighting Products by Wattage Only

For public lighting projects, wattage is only one part of the selection. The right product path depends on road width, pole height, spacing, optical distribution, working hours, backup days, installation method, maintenance access, pole structure, and tender document requirements.

Road WidthPole HeightSpacingOpticsBackup DaysInstallation MethodMaintenance AccessTender Documents

RFQ Input Checklist

Prepare these project inputs before quotation so the product path, optics, backup requirement, and document set can be reviewed together.

Project Country / City

Confirms climate, solar radiation, grid condition, and environmental exposure.

Road Width / Area Size

Defines lighting class, optic path, pole height, and product category.

Pole Height / Spacing

Controls illuminance, uniformity, mounting method, and simulation needs.

Power Source

Solar, AC grid, hybrid, or smart control requirement determines the first product path.

Working Hours

Sets load profile, dimming logic, and daily energy requirement.

Backup Days / Rainy Season

Guides PV sizing, battery capacity, autonomy, and project risk review.

Required Documents

Datasheet, IES/LDT, DIALux/Relux, BOQ, drawings, packing list, and test reports where applicable.

Installation Conditions

Checks foundation, wiring, wind, corrosion, battery access, and civil coordination.

Prepare Your Project Inputs
Upload BOQ / Drawings
ENGINEERING DOCUMENT PACK

Engineering Files Available

A structured document-pack system for EPC, municipal, consultant, and distributor review. Files are confirmed by product path, project condition, and tender stage.

Lighting Design Files

  • Datasheet
  • IES / LDT Photometric Files
  • DIALux / Relux Support
Files for road, area, and tender lighting calculation.
Request IES / DIALux Support

Tender & Project Files

  • BOQ Matching Notes
  • Dimension Drawings
  • Pole / Foundation Notes
Files for EPC, consultant, and municipal review.
Request BOQ Matching Review

Delivery & Compliance Files

  • Packing List
  • Certificates / Test Reports where applicable
  • Inspection and handover notes
Files for batch delivery, inspection, and handover discussion.
Request Product Document Pack
Available documents depend on confirmed product configuration, project scope, tender requirements, and document stage.
PRODUCT FAMILIES

Product Families

Compare the main product paths by power source, application scale, control requirement, structure, and document needs before selecting the exact model series.

Solar Street Light Systems

Off-grid project paths for roads, public areas, communities, parks, and municipal programs. All-in-One, All-in-Two, and Split structures can all be reviewed for 100W+ project-specific configurations.
  • All-in-One Solar Street Light
  • All-in-Two Solar Street Light
  • Split Solar Street Light
  • SL-ONE / SL-PRO / SL-PLUS series preview
Explore Solar Systems

Grid & Smart Lighting

AC-grid and connected lighting paths for street retrofits, municipal roads, industrial routes, dimming programs, and smart-city operation requirements.
  • LED Street Light
  • Smart Street Light
  • SL-EPLUS Series
  • SL-SMART Series
Explore Grid & Smart

High Mast & Area Lighting

Large-area lighting paths for ports, airports, logistics yards, stadiums, industrial sites, parking areas, and sports-court illumination.
  • High Mast Lighting
  • LED Flood Light
  • SL-HM Series
  • SL-FL Series
Explore Area Lighting

Poles & Structures

Structural support path for pole height, arm type, flange, anchor bolts, wind load, galvanizing, foundation notes, and drawing coordination.
  • Lighting Poles
  • Pole arms and brackets
  • Flange / anchor bolt notes
  • SL-PL Series
Explore Pole Systems

A Product Page Should Help Buyers Select, Document, and Procure the Correct Lighting System

Sunlurio organizes product paths, document support, manufacturing coordination, and project inputs so EPC and municipal buyers can move from selection to review more efficiently.

Project Documentation Control

Datasheets, IES/LDT files, drawings, BOQ notes, and project document packs are matched by product path.

Engineering Review Before Quotation

Road layout, pole height, spacing, optics, backup days, and installation conditions are reviewed before configuration.

Manufacturing & QC Traceability

Factory production, assembly, packing, and inspection workflow support batch project delivery.

Batch Delivery Coordination

Project orders can be prepared by batch, shipment, document, and handover requirements.

Custom Configuration Support

Optical, control, battery, pole, and document options can be reviewed against project needs.

Installation & After-Sales Support

Installation notes and maintenance-related documents can support local teams where applicable.

Project Manufacturing & Pre-Shipment Quality Workflow

For EPC, municipal, tender, and project-based lighting orders, Sunlurio coordinates engineering review, component matching, production control, inspection, packing, and shipment document preparation before delivery.
Engineering team reviewing BOQ drawings and lighting project documents before configuration
01

Engineering & Tender Requirement Review

BOQ items, drawings, road conditions, pole height, lighting targets, and tender documents are reviewed before configuration.
Tender Review
Solar street light components matched for project configuration before production
02

Product Configuration & Component Matching

Luminaire power, solar panel capacity, battery pack, controller, pole structure, operating hours, and backup days are matched as one system.
System Matching
Driver controller and wiring assembly for outdoor lighting manufacturing
03

Luminaire Assembly & Wiring Check

LED modules, wiring terminals, housing assembly, cable routing, and pre-delivery visual checks are controlled by batch.
Luminaire Assembly
Battery BMS and power unit check for solar lighting system matching
04

Battery, Controller & Charging System Check

Battery packs, solar controllers, charging components, protection settings, and wiring connections are checked according to the confirmed configuration.
Power System Check
Solar panel matching and PV module inspection before solar street light shipment
05

Solar Panel Matching & Inspection

PV module size, power rating, surface condition, label information, packing status, and batch matching are checked before shipment.
PV Module Check
Lighting pole bracket flange and housing coordination for project orders
06

Pole Fabrication & Surface Treatment

Pole cutting, welding, flange preparation, galvanizing, coating, dimensional checks, and batch identification are managed before delivery.
Pole Fabrication
Lighting product testing and quality control checkpoint before shipment
07

Aging Test & Pre-Shipment Inspection

Lighting function, wiring, appearance, accessories, quantity, labels, and key project requirements are checked before packing.
Aging & QC Inspection
Packing labeling and shipment documents prepared for outdoor lighting project delivery
08

Packing, Labeling & Shipment Documents

Carton marks, pallet packing, accessories, labels, packing list, and shipment documents are checked and prepared for project delivery.
Packing & Delivery

FAQ for Product Selection, Tender Documents, and Engineering Review

Common selection and document questions before quotation, BOQ matching, lighting simulation, and tender review.
The selection should be based on road width, pole height, spacing, solar radiation, backup days, installation method, maintenance access, and document requirements. All-in-one, all-in-two, and split systems can all be configured for project use. The correct path depends on site conditions, not wattage alone.
Yes. For tender or project-stage inquiries, Sunlurio can review the BOQ, product description, drawings, or technical specification and suggest a suitable product path, document list, and clarification points. Final configuration depends on confirmed project inputs.
Please provide the project country or city, road width or area size, pole height, spacing, target lux level, uniformity requirement, mounting method, and product type. For road or area lighting projects, drawings or layout files will improve the accuracy of the simulation support.
No. Wattage alone does not confirm lighting performance or battery autonomy. Solar street light selection should consider LED efficiency, optics, pole height, spacing, working hours, backup days, solar panel size, battery capacity, controller logic, and local climate.
Large-area projects usually require high mast lights, LED flood lights, LED street lights, or a combination of poles and luminaires. The selection depends on mounting height, target lux, beam angle, glare control, uniformity, maintenance method, and DIALux or Relux requirements.
Sunlurio can support datasheets, product drawings, wiring diagrams, pole drawings, foundation reference, packing information, and acceptance-related documents where applicable. Available files depend on product configuration, project scope, and tender stage.

Request Project Configuration Support

Share your project country, road width or area size, pole height, spacing, working hours, backup days, and required documents. Our team will help review the suitable product path and document set.

Request a Project Document Pack

Share your project location, road width, pole height, spacing, working hours, backup days, and required documents. Our team can help prepare configuration guidance, datasheets, IES/LDT files, DIALux support when applicable, drawings, and BOQ matching notes.